0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What color or stripe down one side of a cable marks this side of the cable as 1 pin?
red
What color or stripe down one side of a cable marks this side of the cable as pin 1?
Usually an arrow pointing to it, or a number 1 on the connector. It's also on the side with the red wire. And most boards are keyed with a slot on the side of the female part, and extrusion on the male connector... so it can only be inserted the proper way.
What markings on a ribbon cable identify pin 1?
Pin 1 on a ribbon cable is usually colored differently than the other pins. It is often red.
What does the stripe on PATA cables indicate?
On PATA cables the stripe down one side indicates which side is pin 1.
What color is a squirrel's tail?
Usually matches body color for common ground squirrels and no stripe or distinctive markings like a chipmunk.
What is the name of the colur of the cable in the bottom left-side of aplug?
The color of the cable in the bottom left side of a plug is typically black.
Is Black wire vs black wire with white stripe positive or negative?
Any marking (a white stripe, bump molded into the cable, different wire colours) is an indication for your reference only. It doesn't matter, as long as you connect the marked side on the amplifier to the same polarity on the speaker side.
What colour is the Mongolian flag?
there is a yellow symbol, two red stripes on each side, and a blue stripe down the middle.
What color tights did nikolia volkoff wear?
He wore mostly red gear ... trunks, tights, singlets, probably because he was billed as being from Russia.. but he also wore some black tights and trunks with a red stripe down the side.
Which wire is positive when the wires are clear?
well try to find if one wire has a darker color copper than the other, this would help. or if one side of the wire coat has a white stripe on it, then the stripe indicates it's positive
What will happen when a single cable is at fault in any topology?
Mesh topology- a cable at fault not affect others. Ring topology- a cable at fault, only affect side by side, If main cable at fault ,whole system shut down. Star topology- a cable at fault, others are not affected. If Hub at fault, whole system shut down. Bus topology- main cable at fault, system will shut down. a cable at fault,will not affect others.
How do you punch Network cable in patch panel and color code both side?
This depends on the cable or direct satellite company you are using to access cable on your television. In most cases, you can hold both the side and the front. From there, hold the remote.
