There is a full range of PEX fittings in both plastic and brass. I would highly recommend the brass ones. There are many different shapes in 1/2 and 3/4, including 3 different kinds of valves. The "Surelok" stainless steel crimp rings are cheaper and better than traditional copper rings and also use a cheaper crimp tool by Waterline or Surelok. (currently about $50 in Home Depot)
Very easily
Yes, PEX pipe can be buried underground as it is commonly used for underground water supply lines.
To properly install a PEX refrigerator water line in your kitchen, first turn off the water supply. Measure and cut the PEX tubing to the appropriate length. Use a PEX cutter to ensure a clean cut. Attach the tubing to the refrigerator and water supply line using PEX fittings and a crimping tool. Turn on the water supply and check for any leaks. Make sure to secure the tubing to the wall or floor to prevent kinks or damage.
To properly install a PEX sink connection in your plumbing system, follow these steps: Turn off the water supply to the sink. Cut the PEX tubing to the desired length using a PEX cutter. Slide a PEX fitting onto each end of the tubing. Use a crimping tool to secure the fittings onto the tubing. Connect one end of the PEX tubing to the sink's water supply line. Connect the other end to the main water supply line. Turn on the water supply and check for any leaks.
To properly install a PEX shower head fitting in your bathroom, first, shut off the water supply to the shower. Next, use a PEX cutter to cut the PEX pipe to the desired length. Insert the PEX fitting onto the pipe and use a crimping tool to secure it in place. Finally, attach the shower head to the fitting and turn the water supply back on to test for leaks.
To properly install a PEX union in a plumbing system, follow these steps: Cut the PEX tubing to the desired length using a PEX cutter. Slide a PEX fitting onto each end of the cut tubing. Insert a PEX union fitting between the two PEX fittings. Use a crimping tool to secure the fittings onto the PEX tubing. Check for leaks by turning on the water supply and inspecting the connections. Following these steps will ensure a secure and leak-free installation of a PEX union in a plumbing system.
There is no special PVC pipe. CPVC can be used for hot water applications or in my opinion just use PEX pipe.
To convert your plumbing system from PVC to PEX pipes, you will need to first shut off the water supply, remove the existing PVC pipes, and install PEX pipes using the appropriate fittings and connectors. It is important to follow the manufacturer's guidelines and local building codes when making this conversion.
PEX piping offers several benefits for hot water heater installations. It is flexible, making it easier to install in tight spaces. PEX is also resistant to corrosion and scale buildup, which can prolong the lifespan of the system. Additionally, PEX is cost-effective and has good thermal properties, helping to maintain water temperature efficiently.
To repipe your house using PEX piping, you will need to first shut off the water supply and drain the existing pipes. Next, plan the layout of the new PEX piping system and measure and cut the PEX tubing to fit. Install fittings and connectors as needed, and secure the PEX tubing in place using clamps or brackets. Finally, test the new piping system for leaks before turning the water supply back on. It is recommended to consult a professional plumber for guidance and assistance with repiping your house using PEX piping.
For cold water,start at the water meter, the follow it to the hot water tank for the hot lines. They are pretty easy to see, they are either copper or pex, or galvanized pipe.
To repipe a house with PEX, first turn off the water supply and drain the pipes. Cut out the old pipes and fittings. Measure and cut the PEX tubing to fit the new layout. Install fittings and connectors as needed. Secure the PEX tubing in place using clips or straps. Turn on the water supply and check for leaks. Flush the system to remove any debris.