0
What else can I help you with?
Can a pool pump with 2 inch inlet and outlet be used with 1 12 inch PVC piping?
Yes, it can, this is fairly common. Just use a PVC reducer to connect.
How can I effectively seal a PVC pipe leak?
To effectively seal a PVC pipe leak, you can use a PVC pipe sealant or epoxy putty. First, clean and dry the area around the leak. Then, apply the sealant or epoxy putty to the leak and allow it to cure according to the manufacturer's instructions. This should create a strong and durable seal to stop the leak.
How can I effectively seal a PVC pipe?
To effectively seal a PVC pipe, you can use PVC primer and cement. First, clean the pipe and fitting with a cloth and apply primer to both surfaces. Then, apply cement to the pipe and fitting and quickly join them together. Hold the pieces in place for a few seconds to allow the cement to set. This will create a strong and watertight seal.
Can you cut into cast iron soil pipe with plastic soil pipe?
You can put up to a 2 inch pipe into a 4 inch. If you are putting 4 inch to 4 inch, either take out a section of the cast and put the PVC in or cut out a section and connect the PVC to the cast with rubber sleeves meant for this. You can use a saddle clamp for the 2 inch. It is a half round piece of PVC with a 2 inch connection in it. It is held on with two U bolts that go around the cast pipe. Put it where you need it and mark the 2 inch hole on the cast. Drill a series of 1/8 inch holes around this circle. when you get them all drilled, you can break out the plug. Try to keep it from falling into the cast pipe. Put the saddle clamp on and connect the PVC pipe as needed. Seal the saddle clamp to the cast pipe with plumbers putty.
How can I repair a PVC pipe without cutting it?
To repair a PVC pipe without cutting it, you can use a PVC repair coupling or a PVC repair epoxy. These products can help seal leaks or cracks in the pipe without the need for cutting and replacing the damaged section.
What size PVC pipe do you use for the main drain line out of your house to the street?
Most of the time it is 4 inch.
How can I effectively seal a leaking PVC pipe?
To effectively seal a leaking PVC pipe, you can use a PVC pipe sealant or PVC pipe repair tape. First, clean and dry the area around the leak. Then, apply the sealant or wrap the repair tape tightly around the leaking area. Allow it to set and cure according to the product instructions. This should help stop the leak and prevent further water damage.
Can you use plumbers glue on a PVC inflatable boat?
NO. Although you may have plumbers PVC glue, it doesn't work well with flexible PVC like an inflatable. -Better products are Aqua Seal (available in Walmart Sports Dept) or 3M Marine Adhesive.
How can I connect PVC to galvanized pipe?
To connect PVC to galvanized pipe, you can use a PVC to threaded adapter. This adapter has a female threaded end that can be screwed onto the male threaded end of the galvanized pipe. Make sure to use Teflon tape on the threads to create a tight seal and prevent leaks.
What size PVC pipe should you use for 8' long clothes rack?
PVC will sag under the weight of clothing no matter how wide. Use a 3/4 inch pipe with the appropriate wooden dowel inserted through the tube.
How can I cap off a PVC water line effectively?
To cap off a PVC water line effectively, you can use a PVC cap that fits securely over the end of the pipe. Simply apply PVC primer and cement to the end of the pipe and inside the cap, then firmly press the cap onto the pipe and hold it in place for a few seconds to ensure a tight seal.
How can I connect PVC to cast iron pipes?
To connect PVC to cast iron pipes, you can use a rubber coupling with stainless steel clamps. Make sure the pipes are clean and dry before attaching the coupling. Tighten the clamps securely to create a watertight seal between the PVC and cast iron pipes.
