It means that you have a "Briggs" toilet tank, for which the number on the top piece of it is 7421 A B11.
The purpose of the flapper inside a toilet tank is to control the flow of water from the tank into the toilet bowl when the toilet is flushed.
The purpose of the flapper inside the toilet tank is to control the flow of water from the tank into the toilet bowl when the toilet is flushed.
The secret message hidden inside the toilet tank is a note that reveals important information or instructions.
Either on the underneath side of the lid or on the back of the tank inside there should be a model number. Possibly on the underneath side of the tank also.
If you have a copper float ball that will do it
Inside the tank on the back side there are usually numbers stamped in. If not there, under the tank may be printed on ones.
A toilet anti-sweat valve helps prevent condensation on the outside of the toilet tank by mixing warm water with cold water before it enters the tank. This helps regulate the temperature of the water inside the tank, reducing the likelihood of condensation forming on the outside.
They weaken the little plastic parts inside the tank so they break. I learned this when I had to replace the insides of my tank. The chemical in the water corrodes the plastic.
Yes, if the toilet tank screw is leaking, it can cause water to leak from the toilet tank.
The width of a toilet tank can vary in size. The average width of a toilet tank is about 18 inches.
check that the toilet stopper has been switched on and check that the strainer inside the toilet inlet is clear of debris
Not unless your family goes to the toilet about 50 times a day. If this bothers you, fit a low capacity tank, or just put a brick inside it.