An airbag code 36 typically indicates a fault related to the driver's side airbag, often associated with issues in the airbag system's wiring, connectors, or the airbag module itself. This code can suggest that the system has detected a malfunction that could prevent the airbag from deploying in the event of a collision. It's important to have a professional technician diagnose and repair the issue to ensure the safety systems in the vehicle are functioning properly.
The Airbag Code 36 for a 2001 Ford Taurus is the airbag code for the Driver Side, Side Airbag. This means that there is either a faulty connection, and wires may need to be cleaned, or that the driver side, side airbag needs to be replaced.
It's a passenger airbag deactivated mines doing the same at minute
Airbag code 19 for a 2006 Ford Taurus typically indicates a fault with the driver's side airbag circuit. This code can be triggered by issues such as a malfunctioning airbag module, a problem with the airbag connector, or a fault in the wiring. It's important to diagnose and repair the issue promptly, as it can affect airbag deployment during a collision. A professional technician should be consulted for accurate troubleshooting and repairs.
lost battery feed
There is no code 91. The codes start at 12 and stop at 53.
The airbag code 411 in a 2008 Lincoln Town Car typically indicates a fault in the driver's airbag circuit, often related to an open or shorted condition. This code may be triggered by issues such as a faulty airbag module, damaged wiring, or a problem with the airbag itself. To resolve the issue, a thorough diagnostic check of the airbag system is recommended to identify and repair the specific cause of the fault.
The airbag light comes on for a bulb check at start up. If it stays on the airbag computer has detected a malfunction and set a trouble code.
The airbag light stays on when the computer detects a malfunciton and sets a code. You will need to have the system checked with a scan tool.
i have the same problem did you get the answer to fix it
ck driver side airbag connecter.clear code see if it returns
The airbag code 52 on a 96 Ford Windstar often means nothing more than that there is a loose connection in the electrical system. The code can be reset by disconnecting the battery for about 10 minutes, then reconnecting it. If that doesn't work, the code may also be indicating that the airbag itself is not getting power and requires servicing.
Airbag code 19 indicates that the RCM has detected a circuit problem with the driver's side airbag circuit. That might mean a connector or a clock spring fault or the airbag or RCM has failed electrically. It is STRONGLY recommend to leave airbag system repairs to someone with the proper training and equipment as it can be hazadrous to your health to try and repair it youself.