You put him down the garbage disposal.
A garbage disposal has little blades down inside of it and when you put food in it and turn it on the blades shred the food into small pieces. It works kind of like a blender and grinds the food into little pieces.
One of the most common problems encountered with a garbage disposal occurs when you try to turn the disposal on, but nothing happens. If you are experiencing this issue, there are several things you can try to fix the garbage disposal yourself before you go through the trouble of calling a professional repairman or replacing the disposal completely. Before you try anything, however, always remember that you should never put your hand down the drain and into the disposal as this is extremely dangerous. If your garbage disposal makes absolutely no noise when it is turned on, this signals that the problem is electrical in nature. The first thing you should do is verify that the garbage disposal is connected to the power source. Obviously, if the disposal isn't plugged in, it will not run. If you find that the disposal is properly connected to power, try pressing the Reset button typically located on the bottom of the disposal unit. In the event that pressing Reset doesn't work, the next thing you can do is check the circuit breaker to see if it has been turned off or tripped. If it has been tripped, simply turn it back on. If you have checked the power, reset the unit, and checked the circuit breaker and your disposal still refuses to make a sound, there is either something wrong with the switch or the disposal may need to be replaced. To check the switch, you must first locate it. It may be on the wall near the disposal or under the sink. Once you have located the switch, you can replace it to see if that solves the problem. Before you replace the switch, however, you must disable the circuit breaker that powers the garbage disposal. After you have replaced the switch, you should turn the circuit breaker back on and check to see if your garbage disposal is working. If the switch was faulty, the garbage disposal should run normally. In the event that none of the suggestions detailed above are successful, it is likely that your garbage disposal cannot be repaired and you will need to replace it. You can either do this yourself or call a professional to install the new disposal.
it is gonna hurt (correct me if i am wrong), pls try yourself with a recorder & u may famous as the actor in jackass.
If you put your hand in a garbage disposal, it can cause severe injuries, including lacerations, fractures, or even amputations, due to the sharp blades and the device's powerful motor. The disposal can also pull your hand in unexpectedly, making it difficult to remove it quickly. It's crucial to always ensure that the disposal is turned off and unplugged before attempting any maintenance or cleaning. Always exercise caution and avoid putting any body parts near the disposal.
It lands in a garbage bin and is later taken to a garbage dump by a garbage truck.
i want my answer
Pre rinse your dishesMake sure the food traps are empty and clearRun the garbage disposal before the dishwasherUse JetDryANS 2 -Remove the rotor arm that sprays in the centre of dishwasher. Often the small holes are plugged when this happens
After garbage is collected by waste workers, it is typically transported to a sorting facility or landfill. At the sorting facility, recyclables are separated from general waste, and materials are processed for reuse. Non-recyclable waste is then taken to landfills or incineration plants for disposal. The overall goal is to minimize environmental impact and promote recycling and waste reduction.
they get killed and tossed in garbage
Medical waste disposal sites can become unliveable. There are medical waste disposal companies that specialize in disposal and must abide by certain government regulations for waste disposable.
Burried in land fills