0
In some cases when automatically dialing a number, you may need to tell the autodialer to pause to allow for a secondary dial tone. For example, if you dial '9' to get an outside line on your business phone system, you may need to program a pause after the 9 to allow time for the outside dial tone.
What else can I help you with?
Is it dangerous to use speed dialing while driving?
The speed dialing option is not only good for its convenience on dialing numbers fast but if used the right way while driving; while at a light or a pause in traffic flow speed dialing can be utilized very effectively while driving.
What are the p and w letters used for when the star key is pressed multiple times on a mobile phone?
The P stands for pause. This will insert a two-second pause before dialing the numbers after the P. W stands for wait. This will wait for the phone to start ringing on the other end before dialing the numbers after the W.
What is the difference between rotary and touch tone dialing?
1) Pulse dialing sends number in terms of pulses while the tonedialingsends the number in form of tones " dtmf"2) pulsedialingis slower than tone dialing 3)pulse dialing doesn't use keypad while tone dialing use 4) pulse dialing isobsessed while tone dialing is modern
What is the dialing code for Barbados?
The dialing code for Barbados is 246
What is Direct Inward Dialing (DID)?
Direct inward dialing is known as DID
When was Dialing for Dingbats created?
Dialing for Dingbats was created in 1989.
What is direct outward dialing also called?
Direct outward dialing is called DOD, or Direct Distance Dialing (DDD)
What is direct inward dialing shortened to?
Direct inward dialing is known as DID
What is the duration of Dialing for Dingbats?
The duration of Dialing for Dingbats is 1.35 hours.
What is a dialing code used for?
For dialing a telephone number outside your local area.
What are the Regional dialing codes of UK for 2017?
There are no 'regional' dialing codes in the UK. Each town (or group of small towns) has an individual dialing code.
How to switch from pulse to tone dialing?
On a modem, or any other device that uses the "AT" command set, you can put the letter P for Pulse or T for Tone in the dial string. For example, ATDP9,1800T555P0123 would pulse-dial 9 (pause) 1 8 0 0, then tone dial 555, and then pulse dial 0123. On many landline push-button phones, there is a switch that allows you to select Tone or Pulse dialing. If you have the switch set to Pulse and hit the star key, the phone will switch over to Tone dialing for the rest of that call.
