wires are color coded so they don't get mixed up!
mostly it's the fact that the insulation on the wires gets brittle and cracks. and the older the wireing, the more likely it is to get "old" fast.
No. In fact, the wires from the rear if connected to the front will fix a 250 problem!
No. In fact it is the opposite. Conductivity is the reciprocal of resistivity so a high resistivity means low conductivity. peace.
The different colors of wires used in electrical installations have specific meanings. Red wires are typically used for hot wires, white wires for neutral wires, green wires for ground wires, and black wires for hot wires as well.
In electrical circuits, white wires are typically used as neutral wires, green wires are used as ground wires, and black wires are commonly used as hot wires.
white wires are neutral. green wires are ground wires.
electricity is often refered to by teachers as being like water in the fact that it will take the path of least resistance. that is the only likeness between the two.
about 350.00 just for the fact some of the wires are in a bad place. to wear they have to take apart some of the engine to get to it.
The wires and that you have the wires
hot wires are black, white wires are ground
Read the instructions which should come with the baseboard wire track.It is the easiest when you can hide wires behind the walls.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
It cost me over $450 at the dealer. This is due to the fact that they must remove the intake manifold to access the back 3 plugs.