It's glue that comes as a cylinder with one epoxy wrapped around the other. You cut off a slice and mix it in your hands.
Yeah you can use hot glue. I have used epoxy resin and epoxy putty. The putty was the easiest to use and didn't break with the force.
To effectively harden wood putty, you can mix in a small amount of wood glue or epoxy resin. This will help the putty cure and become more durable. Additionally, allowing the putty to dry in a well-ventilated area can also help it harden properly.
Epoxy itself is glue that will hold to metal.
There are no health risks of epoxy glue,unless you ingest it.
The best techniques for using epoxy putty on concrete surfaces include cleaning the surface thoroughly, mixing the epoxy putty according to the instructions, applying it evenly with a putty knife, and allowing it to cure completely before sanding or painting.
To effectively repair damaged wooden surfaces using epoxy putty wood filler, follow these techniques: Clean and prepare the damaged area by removing any debris or loose wood particles. Mix the epoxy putty according to the manufacturer's instructions. Apply the epoxy putty to the damaged area, shaping it to match the surrounding surface. Smooth and blend the epoxy putty with the wooden surface using a putty knife or sandpaper. Allow the epoxy putty to cure completely before sanding and finishing the repaired area. By following these techniques, you can achieve a strong and seamless repair of damaged wooden surfaces using epoxy putty wood filler.
Yes you can use epoxy glue inside. You can use it anywhere.
epoxy
When using steel epoxy putty to repair metal surfaces, it is important to follow these best practices: Clean the surface thoroughly before applying the putty. Mix the epoxy putty according to the manufacturer's instructions. Apply the putty evenly and smoothly to the damaged area. Allow sufficient time for the putty to cure and harden. Sand and paint the repaired area for a seamless finish. Following these steps will help ensure a successful repair of metal surfaces using steel epoxy putty.
You can find epoxy glue at most hardware stores and at Walmart, Rona and Home Depot.
Epoxy if not much to glue. PL200 in caulk tubes if there is lots to glue.
Any of the normal epoxy glues would be usable for this.