Heavy Wall pipe refers to a steel pipe has a wall thickness of relatively thick.
by SunnySteel.com
Wall thickness (Schedule)
=3.14 * (Diameter of pipe in Mtr. - wall thickness in Mtr. ) * Wall Thickness in Mtr. * 7850
"Solid Steel" would not be a pipe- it would be a rod. Weight of pipe will vary depending on the thickness of the wall of the pipe.
The 80 in 80 steel pipe indicates its wall thickness; the higher the number, the thicker the pipe. The pressure rating for a 5" schedule 80 steel pipe at 100 degrees Fahrenheit is 1857 psig.
That would depend on the wall thickness of the pipe. 54 inches is the outside diameter so subtract the pipe wall thickness (x2) adn you have the inside diameter.
.165"
The answer depends on the thickess of the pipe. The universal formula for carbon steel pipe weight is 10.6802 x T x (OD-T) T=Thickness of pipe OD=Outside Diameter If your pipe was carbon steel with a thickness of .375" it would be 238.8 lbs/ft
This Link: http://www.gizmology.net/pipe.htm
Hello??? black steel comes in various schedules , schedule 10, 20 40 ,80 ,120 the thicker the wall the higher the pressure the piping can withstand
The weight of a mild steel (MS) pipe with a 250 mm outer diameter depends on its wall thickness and length. For example, using a standard wall thickness of 8 mm, the weight can be approximately calculated using the formula: Weight (kg/m) = (Outer Diameter - Wall Thickness) x Wall Thickness x 0.02466. This results in a weight of around 22.6 kg per meter for a pipe with these specifications. For precise weight, refer to specific steel pipe weight charts or calculations based on actual wall thickness.
B Class pipe Ms- This pipe is made out of Mild Steel, wall thickness will be 3.2 mm +/- 10%, this pipe will be painted in Blue colour at the end. B Class will be medium duty pipe.
That depends on the thickness of the "wall."