Normal Latency of a cable modem is ideally between 5 and 40 ms. For a DSL modem this is normally 10 to 70ms. For a dial-up modem, this is normally anywhere from 100 to 220ms. For a cellular link, this can be from 200 to 600 ms. For a T1, this is normally 0 to 10 ms.
Whereas,
TTL or Time to Live refers to how many routers your packet can go through before it expires. Usually a packet finds its home in less than 32 hops, but 64-128 is a good default
one disadvantage of using satellite for an internet connection is that it experiences delays in transmission (call latency), especially when uploading, more so than DSL or cable modem
form_title= Cable Modem form_header= Repair or replace your cable modem. Do you need to replace your cable modem?*= () Yes () No What is your budget for a cable modem?*= _ [50] Do you need help with the repairs or installation?
The ethernet cable is the cable with end plugs similar to a phone cable but a little larger in appearance. The cable modem may have one leaving it to go to your PC or your router for a home network
No, a cable modem connects to a cat5 coax cable and a DSL modem connects to a standard phone line.
No, just connect the cable to the cable modem and then connect the modem to the computer.
Yes. In fact, this is the standard, intended way for a wireless router to work. ISP/Internet service DSL/Cable-----> Modem---->Router )))))) PC ---> Cable ))))) Wireless
You will need to buy a new modem that is designed for your DSL modem. This is due to the fact that the modem is designed to use the dsl signal opposed to the cable modem.
In general, a cable modem will offer better and more reliable bandwidth and a wireless modem.
The cable modem can be faulty, check with you service provider
No. Your computer would connect directly to the cable modem via an ethernet cable.
Your question presupposes that you have subscribed to cable internet service, and that the provider has run a cable to your home. It also presupposes that you have a cable modem. If these suppositions are correct, you just have to run coax between the cable jack on the wall and the cable modem. Then you need to connect the modem to your computer via USB, FireWire, or whatever interface your modem and computer have in common. FriPilot
For cable modem networking to work the cable modem will need to be connected to a network hub. This will allow all computers in the network to connect to the internet.