answersLogoWhite

0

Pipe Stress.

pipe carry's alot of things.stress comes into mind at pump connections and steam hangers and the system of steam relies strongly on proper stress points to expand.this is called a steam loop.lets the pipe expand and retract without affecting what it is connected to .stress through out the system can be seen at times even heard

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you calculate the collapse pressure for pipe?

For calculating the collapse pressure of a pipe, you first need to calculate the Hoop stress, which is given by :- Stress = Circumferencial Force/(radial thickness*axial length) If the stress crosses this value the pipe would collapse.


A 2-in schedule 40 sheets pipe is used as a leg for a machine The Load carried by the leg is 2350lb.Compute the bearing stress on the floor if the pipe is left open at its end?

A. A 2-in schedule 40 sheets pipe is used as a leg for a machine. The Load carried by the leg is 2350lb. a. Compute the bearing stress on the floor if the pipe is left open at its end b. Compute the bearing stress on the floor if a flat plate is welded to the bottom of the pipe having a diameter of the pipe


How to calculate combined effect of bending and torsional stress on a rotating pipe?

You can calculate the combined effect of bending and torsional stress on a rotating pipe using the outside diameter. The angle of rotation and the shearing stress should also be considered.


What Is Water Stress In Egypt?

The main water stress in Egypt comes from a combination of the shrinkage of the Nile, the faulty pipe system, and the growing population.


What was René Magritte's reasons behind 'This Is Not a Pipe'?

To stress the fact that a picture is different from its subject.


You are looking for information on ductile iron pipe class 52 pipe support spacing and related stress calculations?

i want IS codes 13382:1992 and 9523:2000


What are the uses for the different schedules of Pipe?

It's a standard to decrease the cost of fabrication. you can choose the better sch for your uses, depend of : _ the pressure inside the pipe _ life time and corrosion _ mechanical stress _ ...


Compute the bearing stress on the floor if the pipe is left open at its end when 40 sheets and leg equals 2350lb?

Temperature


What is class 4 PVC pipe used for?

Class is the classification criteria employ by the manaufacturer to differentiate pipe based on diameter, rating and other criteria. Class 4 just like other classes of pvc pipe can be used for whatever you wish to use it for depending on the location of the pipe and pressure the pipe is subjected to minding the hoop stress equation relations (sigma=Pr/t). Then you can determine which schedule of pipe you actually need.


Which type of pipe is particularly susceptible to line stress due to earth movement?

Cast Iron


What is the stress formula for a pipe with a 50mm diameter outside and a 30mm diameter inside and a load of 80N?

area = pi x (502 - 302)/4 = 1256.64 mm2 stress = 80N / 1256.64mm2 = 0.06366 N/mm2


What is the distortion of a pipe bend?

The distortion of a pipe bend refers to the deformation that occurs when a pipe is bent, which can affect its shape and structural integrity. This distortion may include changes in the cross-sectional area, wall thickness, or alignment of the pipe, potentially leading to stress concentration points that can cause failure. Proper design and manufacturing techniques are crucial to minimize distortion and ensure the pipe maintains its intended flow characteristics and mechanical properties.