0
What else can I help you with?
How do you do subnet mask?
The site below has a fairly good explaination of the uses of subnet masks.
What are three active directory objects in a site topology?
Site, Subnet, and Site Link
What object is used to correct site for a newly installed DC?
Subnet
Do the makers of your site believe they are critical about the questions?
It excludes subnet information from the routing updates
What is a subnetting calculator used for?
A Subnet calculator is used for determining the attributes of an IP subnet including the start of it. Results of the subnet calculation include the access control lists, the subnet range and the subnet bitmap.
Is 192.168.12.8 and 192.198.12.65 in the same subnet?
No. 192.168.12.1 - 192.168.12.254 is one subnet (assuming 255.255.255.0 subnet mask)
What is the difference between the subnet mask for a Class A address with 16 bits for the subnet ID and a class B address with 8 bits for the subnet ID?
In a Class A address, the default subnet mask is 255.0.0.0, allowing for a large number of hosts within a single network, but with 16 bits designated for the subnet ID, the subnet mask becomes 255.255.0.0. In contrast, a Class B address has a default subnet mask of 255.255.0.0, and with 8 bits for the subnet ID, the subnet mask would typically be 255.255.255.0. Thus, the key difference lies in the number of bits allocated for the subnet ID and the resulting subnet masks, affecting the number of available subnets and hosts per subnet.
How you create subnet id for a particular id?
To create a subnet ID, you start with the network's base IP address and subnet mask. The subnet mask determines how many bits are allocated for the network and how many for the hosts. By applying the subnet mask to the base IP address, you can identify the subnet ID, which represents the network portion of the address. For example, if your base IP is 192.168.1.0 with a subnet mask of 255.255.255.0, the subnet ID is 192.168.1.0.
What is ip subnet-zero?
If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.If you divide a net into several subnets, subnet-zero is the first subnet. Some older technologies don't allow the use of this first subnet.
What is datagram Subnet?
datagram subnet is connection oriented network.
What is the subnet of 66.237.178.241?
The default subnet would be 255.0.0.0 (class A)
Does ipv6 require a subnet mask?
It does not require a subnet mask.
