In saturation region transistor acts as a non linear device i.e, there is no linear relation between input and output because in saturation region output does not change for variation in input.
Whereas in other operating mode transistor acts as a linear device.
distinguish between linear and non linear demands funcions
Nonlinear do not satisfy the superposition principle. Linear problems, as implied, do.
Nonlinear devices are components that do not follow a linear relationship between input and output. This means that their response is not proportional to the input signal. Examples include diodes, transistors, and nonlinear capacitors. Nonlinear devices are often used in electronic circuits to perform functions like signal processing and modulation.
The differences between the these two is that linear scale shows the relation between the map distance and the ground distance. The nonlinear scale do not show the relation between the map distance and the ground distance.
Linear system follows principal of superposition and homogeneity and Non linear system does not follow the same.
linear system is like a chemistry equation or math equation where on both sides it must balance. Nonlinear is a math equation or physics that does not appear to have a direct answer just like chaos theory. lulu254ever
Linear elements :In an electric circuit, a linear element is an electrical element with a linear relationship between current andvoltage. Resistors are the most common example of a linear element; other examples include capacitors,inductors, and transformers.Nonlinear Elements :A nonlinear element is one which does not have a linear input/output relation. In a diode, for example, the current is a non-linear function of the voltage.Most semiconductor devices have non-linear characteristics.
A linear scale represents values in equal increments, meaning that the distance between any two points on the scale corresponds directly to the difference in their values. In contrast, a nonlinear scale has varying increments, where the distance between points does not reflect a consistent difference in values, often used to represent exponential or logarithmic relationships. This means that while a linear scale allows for straightforward comparisons, a nonlinear scale may better illustrate complex relationships or phenomena.
They are both types of motion.
identity linear and nonlinear functions from graph
2.54 centimetres = 1 inch and tat is linear. There is no non-linear inch.
A nonlinear relationship is one that cannot be expressed using a line. y=3x is a linear relationship between x and y. y = log(x) is nonlinear.