if we have a no. for dialing for Canada, what would be the prefix code to use before dialing the no.
Revertive pulse dialing is a system first introduced in Panel Switch Exchanges and used only between exchanges in which the called exchange sent back (revertive) dial pulses for each digit to the sending exchange until the sending exchange signaled that the correct number of pulses had been sent for that digit.This is in contrast to standard pulse dialing in which a phone sent dial pulses to the local exchange for each digit or the sending exchange sent dial pulses to the called exchange for each digit.Revertive pulse dialing was considered a more reliable means of transferring numbers between exchanges than standard pulse dialing as certain types of errors in the transfer could be detected that was not possible to detect with standard pulse dialling.A telephone cannot use revertive pulse dialing! It can only be used between exchanges.
In UK it is in Hampshire.Alton 01420 STD Area Dialing Code. The 01420 area code is a 4 digit dialling code (excluding the zero) which means the local telephone number is 6 digits long. The Alton 01420 dialing code is situated in the district of Hampshire in the South East Region of the UK.
Some telephones, fax machines, and modems can use pulse dialing, because for many years, touch-tone dialing either was not available at all or required an extra monthly fee. In pulse dialing, the equipment sends a series of electrical pulses equivalent to rapidly connecting and disconnecting the telephone line. The count of pulses gives the digit being dialed.
1) Pulse dialing sends number in terms of pulses while the tonedialingsends the number in form of tones " dtmf"2) pulsedialingis slower than tone dialing 3)pulse dialing doesn't use keypad while tone dialing use 4) pulse dialing isobsessed while tone dialing is modern
Four-digit phone numbers were primarily used in the United States before the widespread adoption of area codes and seven-digit dialing. This system was prevalent from the early 20th century until the late 1950s, when the North American Numbering Plan was introduced, requiring the use of three-digit area codes and seven-digit local numbers. The transition to seven-digit dialing became standard as more telephone lines were added and the need for more numbers grew.
Maryland switched over to 10-digit dialing for all local calls in 1997, in preparation for the 301/240 and 410/443 overlays.
7 or 10 digits in the US. While much of the US has moved to ten digit dialing, rural areas still use seven digit dialing, omitting the common area code.
Touch Tone was a trademarked name used for the system technically known as DTMF, or Dual-Tone Multi-Frequency, dialing. In DTMF, pressing each key on a telephone dial produces two different tones. Each row and each column of the dial is assigned a specific frequency (pitch) of tone, so the combination of the two tones uniquely identifies the key that was pressed. The telephone switch receives and decodes the tones in order to process the call. This is in contrast to pulse or rotary dialing, in which a series of electrical pulses or clicks are sent through the telephone wire, either by turning a rotary dial or by generating the clicks electronically. The telephone switch counts the number of clicks to get each digit that is dialed.
8,000,000 million telephone numbers are possible with these conditions, corresponding to the numbers 2,000,000 - 9,999,999. Many countries have forced dialing of the area code now, creating telephone numbers with a minimum of 10 digits. This means there are 8 million possible telephone numbers in each area code. (area code of 3 digits long).
Telephone numbers in Turkey consist of the telephone country code +90, followed by a three-digit area code and a 7-digit subscriber number.
5 digit telephone numbers having at least one of their digits repeated is = total possible 5 digit telephone numbers - 5 digit telephone numbers without any digit being repeated. =(10*10*10*10*10)-(10*9*8*7*6) =100000-30240 =69760