On almost all washing machines it is attached immediately below the centre of the tub. It will be easily recognisable by the thick hose going to the back of the machine.
The washing machine drain may overflow due to a clog in the drain pipe, a malfunctioning pump, or an issue with the machine's water level sensor.
You can drain it directly into a drain pipe. Just make sure the the top of the drain pipe is even with the top of the washing machine. If not, the water from the washing machine will drain all of the time. There is no valve in the machine to stop the water from draining. The washing machine drains using a pump motor.
The moter turns it
None, but you could install a transfer pump to the drain hose of one.
A washing machine drain diagram typically shows the path of water flow from the washing machine through the drain hose and into the household plumbing system. It may also include details about the location of the drain pump and any necessary connections or components.
Your washing machine drain may overflow due to a clog in the drain pipe, a malfunctioning pump, or an issue with the machine's water level sensor. It is important to check and address these potential causes to prevent further overflow.
Either have the washing machines pump it up Or use a sump designed to handle washing machine waste lint, volume etc
A"drain pump" machine uses a drain tube that is higher than the the level of water in the basin and therefore uses a mechanical pump to empty the tank overthat threshold pipe. A "dump valve" drain uses a mechanical valve at the bottom of the basin and simply opens to drain the tank.
You would need a pit for the wash water to drain into, them pump it up with a sump or effluent pump.
Your washing machine may be leaking from the bottom during the drain cycle due to a damaged or clogged drain hose, a faulty pump, or a worn out seal. It is important to inspect and address these issues promptly to prevent further damage.
To troubleshoot a clogged drain in your LG washing machine, first unplug the machine and locate the drain pump filter. Remove any debris or blockages from the filter and clean it thoroughly. Check the drain hose for any obstructions and clear them if necessary. Run a cleaning cycle with vinegar or a washing machine cleaner to help remove any buildup. If the issue persists, consider contacting a professional for further assistance.
what would be needed to drain a washing machine up from a basement? We have power and water, as the water heater is in the basement, but the drains are about five feet up.