0
What else can I help you with?
Is HDMI hot pluggable, allowing for devices to be connected or disconnected without needing to power down or restart the system?
Yes, HDMI is hot pluggable, meaning devices can be connected or disconnected without needing to power down or restart the system.
How can you discover disconnected hardware or connected hardware to the motherboard without opening the case?
You can check what devices are connected in Device manager in windows.
How are the devices connected on a bus network?
Devices on a linear bus network are connected to each other via a wire, usually through a T-connector device. In effect, the devices are "daisy chained" together without any other device connecting them.
Can input out put devices stand alone without being connected to a computer?
No. What purpose does a mouse serve with nothing to process its clicks? What good does a monitor do with no computer to send it information? Input and output devices are peripheral devices and need to be connected to the processor to serve a purpose.
How do you scan ports you are connected to and the connected IPs?
To check your internet gateways and lookup all access points you are connected to you should click your start button and open a command prompt. Inside the command prompt type "ipconfig/all" without quotes and press enter. All IPs will then be displayed on the screen.
What is wireless conections?
wireless conectivity is t6hings like bluetooth things that can connect with other devices without wires connected
Which command must be entered when connecting two routers without external DCE devices via a serial link?
Clock rate.
In a WLAN devices are connected by?
In a WLAN (Wireless Local Area Network), devices are connected by wireless communication technologies, primarily using radio frequency signals. These devices communicate through access points or wireless routers, which manage the network and facilitate connections. WLAN typically utilizes standards defined by the IEEE 802.11 family, enabling devices like laptops, smartphones, and tablets to connect and exchange data without physical cables.
The show cdp neighbors command is a very useful network troubleshooting tool. Using the output in the graphic select the statements that are true. (Choose two.)?
Without the specific output from the "show cdp neighbors" command, I can't provide exact statements. However, generally, true statements may include identifying directly connected devices and their interfaces, as well as displaying device capabilities and platform information. To select the most accurate statements, refer to the details shown in the command output regarding device types and connection interfaces.
How star topology works?
In a star topology, all devices are connected directly to a central hub or switch. This central device manages the flow of data between all connected devices, minimizing network collisions and enabling easy addition or removal of devices without affecting the network as a whole. However, if the central hub fails, the whole network can be affected.
Does it consume any electricity when you use generator line from outside with it except using the fuse?
Yes, when using a generator line, electricity can still be consumed by any devices connected to the circuit, even if the main supply is turned off. The generator provides power to the connected devices, which will draw electricity as long as they are turned on. However, if only the fuse is used without connecting any devices, no electricity will be consumed from the generator.
How do you boot a computer from another computer without removing the hard drive?
There sometimes are "Wake on LAN" parameters that can be set in BIOS which will boot a connected computer if the LAN card receives a command.
