There was air in the line. When you turn off the water with the faucet running make sure you turn it back on with the faucet open. That will release any air caught in the lines. That faucet shut with one on a lower floor on and restoring water does not work. Fast and easy. 1. turn on affected faucet 2. shut off water 3. turn water back on 4. faucet should be running smoothly now
that is either your front right wheel bearing or your coil spring is turning need new suspension..$$$$
If your PlayStation makes a grinding noise, it's best if you give it up for lost and purchase a new one.
Need new lifters
To install a new faucet for your sink, first turn off the water supply. Remove the old faucet by disconnecting the water lines and unscrewing it. Clean the area where the new faucet will be installed. Follow the manufacturer's instructions to install the new faucet, connecting the water lines and securing it in place. Turn the water supply back on and test the faucet for leaks.
The steps involved in a bath faucet replacement are: 1. Turn off the water supply to the faucet. 2. Remove the old faucet by unscrewing it from the plumbing. 3. Clean the area where the new faucet will be installed. 4. Install the new faucet by following the manufacturer's instructions. 5. Turn the water supply back on and test the new faucet for leaks.
To change a kitchen faucet, first turn off the water supply. Then, disconnect the old faucet and remove it. Install the new faucet by following the manufacturer's instructions. Finally, reconnect the water supply and test the new faucet for leaks.
The steps involved in a tub faucet replacement are: 1. Turn off the water supply to the faucet. 2. Remove the old faucet handle and trim. 3. Unscrew and remove the old faucet assembly. 4. Clean the area and apply plumber's tape to the new faucet connections. 5. Install the new faucet assembly and tighten securely. 6. Attach the new handle and trim. 7. Turn on the water supply and test the new faucet for leaks.
To replace an old shower faucet with a new one, first turn off the water supply to the shower. Remove the old faucet by unscrewing it from the wall. Install the new faucet by following the manufacturer's instructions and securing it in place. Turn the water supply back on and test the new faucet for leaks.
Here ya go: http://aw-sons.com/how-to-install-a-new-faucet/
To replace a bathroom faucet, first turn off the water supply. Then, disconnect the old faucet and remove it. Install the new faucet by following the manufacturer's instructions. Finally, turn the water supply back on and test the new faucet for leaks.
No, if the current faucet doesn't have a sprayer, there is no place on the faucet to attach the sprayer. It would attach on the underneath side of the faucet in the center.
To replace a faucet aerator, unscrew the existing aerator from the faucet spout using pliers or a wrench. Clean the threads on the faucet spout and the new aerator. Then, screw the new aerator onto the faucet spout by hand, making sure it is securely attached.