0
What else can I help you with?
Why are my pipes making a banging noise when hot water is turned on?
The banging noise in your pipes when hot water is turned on is likely due to a phenomenon called water hammer. This occurs when the flow of water is suddenly stopped or redirected, causing a pressure surge that creates the banging sound. It can be caused by factors such as high water pressure, loose pipes, or improper installation. Consulting a plumber can help identify and fix the issue.
Why are my hot water pipes banging and how can I fix this issue?
The banging noise in your hot water pipes is likely caused by a phenomenon called water hammer, which occurs when water flow is suddenly stopped or redirected. To fix this issue, you can try installing water hammer arrestors, adjusting water pressure, or securing loose pipes. If the problem persists, it's best to consult a professional plumber for further assistance.
Why do my hot water pipes vibrate and make a loud noise when turned on?
The vibration and loud noise in your hot water pipes when turned on is likely caused by water hammer. This occurs when the flow of water is suddenly stopped or redirected, causing a shockwave that reverberates through the pipes. Installing water hammer arrestors or adjusting water pressure can help reduce or eliminate this issue.
Why is there hot water dripping from the faucet?
Hot water is dripping from the faucet because the water heater is set at a high temperature, causing the water in the pipes to be hot and drip out when the faucet is turned on.
Why is copper used for hot water pipes?
Copper is used as hot water pipes because the copper will not corrode when the hot water goes through the pipes
Why is copper used for water pipes?
Copper is used as hot water pipes because the copper will not corrode when the hot water goes through the pipes
Are my hot water pipes frozen?
If your hot water pipes are frozen, you may notice a lack of hot water coming out of the faucets. You can check for frozen pipes by feeling the pipes for cold spots or listening for unusual sounds when you turn on the hot water. If you suspect your hot water pipes are frozen, it's important to take action to thaw them to prevent damage.
Should supply line coming out of hot water tank have a drop down leg in it to keep the tank from losing heat out the pipes?
No this is not necessary. Install the pipes as per usual. You can insulate the hot water pipes up to two meters or up to two yards from the hot water outlet from the hot water tank to prevent this. No this is not necessary. Install the pipes as per usual. You can insulate the hot water pipes up to two meters or up to two yards from the hot water outlet from the hot water tank to prevent this.
Have heat tape on pipes but no hot water why?
Heat tape is just for keeping the pipes from freezing, it does not heat the water. That's what the hot water heater is for.
Can hot water pipes freeze, and if so, what are the potential consequences and how can they be prevented?
Yes, hot water pipes can freeze if the temperature drops low enough. The potential consequences of frozen hot water pipes include burst pipes, water damage, and loss of hot water supply. To prevent this, you can insulate the pipes, keep the heat on in your home, and allow faucets to drip during extremely cold weather.
Where would you find the hot water outlet on the tank and would it increase the hot water pressure if you turned it up?
There are two pipes on the top of most conventional water heaters. One is for cold water in, the other is for hot water out. Plumbers are SUPPOSED to put a valve on the cold water supply to the water heater, but some are too cheap. If that valve is not open all the way you might get low hot water pressure. If the heater is old it could have a lot of sediment in the bottom and THAT could reduce hot water flow and slow the production of hot water. Some homes are equipped with a water pressure regulator where the water comes into the house. If that is turned too low it could affect the flow of water everywhere. If it's none of these, you probably just have small pipes or the pipes are full of hard water deposits, limiting water flow.
Why is there no hot water during a freeze?
During a freeze, water in pipes can freeze and expand, causing the pipes to burst. This can lead to a loss of water pressure and potentially no hot water as the pipes are damaged and unable to deliver it.
