0
Pin 1 of the IC7402 is an output pin because it is part of a quad 2-input NOR gate configuration. Each NOR gate within the IC has specific input and output pins, and pin 1 corresponds to the output of the first NOR gate. The output pin provides the logical result of the NOR operation performed on the two input signals connected to the associated input pins.
What else can I help you with?
How IC 7402 can be connected to use NOR gate?
IC 7402 is different from the other type of IC like 7404,7408,7432 and 7400 when it is connected to have an output desired... if you noticed all i mentioned ic is connected from left to the right. input pin 1 and 2, output pin 3 input pin 4 and 5, output pin 6 input pin 13 and 12, output pin 11 input pin 10 and 9, output pin 8 while in nor gate, to have the desired output it must be connected from right to left... input pin 2 and 3, output pin 1 input pin 5 and 6, output pin 4 input pin 8 and 9, output pin 10 input pin 11 and 12, output pin 13
What is the pin diagram of Integrated Chip L293D?
L293D is having 20 pin IC and also 16 pin IC. description of 20 pin is: 1-enable 1 2- input 1 3- output 1 4,5,6,7,14,15,16,17- ground 8- output 2 9- input 2 10,20-vs 11-enable 2 12- input 3 13-output 3 18-output 4 19-input 4 description for 18 pin: 1-enable 1 2- input 1 3- output 1 4,5,12,13- ground 6-output 2 7- input 2 8,18-vs 9-enable 2 10-input 3 11-output 3 14-output 4 15-input 4
What is output voltage on pin1 of UM66?
According to the datasheet the output on pin 1 of that transistor is a maximum 4.5 volts
What 741 represents in LM 741?
7 active pins 4 inputs 1 output pin
Explain the pin dia gram of IC 7812 belonging to category of logic gates?
The 7812 is not a logic gate. It is a three terminal voltage regulator with an output of +12V.Looking at the pins of the TO-220 device, with the flat side down, the left pin and the case is common, the center pin is input,and the right pin is output. For the smaller TO-92 78L12 device, the left pin is output, the center pin is common, and the right pin is input
What is the output current of a 4017 decade counter?
Datasheets say 10mA per/output pin...
How does LM 7805 work?
The LM7805 is a linear voltage regulator that produces a relatively constant output voltage of +5VDC. There is an input pin, which must generally be greater than +7VDC, a ground pin, and an output pin. If the ground pin is connected to a resistor divider network between output and ground, it can be made adjustable for an output voltage greater the +5VDC. Its rating is 1A, but boost circuits can be built to give it more capacity.
Is a chip and PIN an input or output device?
Input! x
What is the pin diagram of ic 7812?
http://hamradio.lakki.iki.fi/new/Datasheets/transistor_pinouts/case-14.gif Picture in context can be found here: http:/hamradio.lakki.iki.fi/new/Datasheets/transistor_pinouts
What is OE pin OF ROM?
The OE (Output Enable) pin of ROM (Read-Only Memory) is a control signal used to activate the output of the memory chip. When the OE pin is asserted (typically set to low), it allows the stored data to be read from the ROM. If the OE pin is not asserted (set to high), the output is disabled, preventing any data from being read. This feature helps manage data flow and ensures that the ROM does not output data when not intended.
Trying to wire Curtis 906 fuel gauge to Yamaha drive golf cart?
Pin 1 - Battery + Pin 2 - Battery - Pin 3 - Output Signal - May not be needed Pin 4 - Keyswitch. Turns display off when key is off. Can be wired to Battery + if you want it on at all times.
What is the use of offset null pin in integrated circuits?
Pin used to eliminate the effect of internal component voltage on the output of the device.
