answersLogoWhite

0

Aerator in shower head is plugged up. Unscrew head, clean it out, and replace. Make sure you have Teflon tape on hand for the treads on the shower arm when putting the head back on.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What can I do to increase the shower head pressure if it is low?

To increase shower head pressure if it is low, you can try cleaning the shower head, checking for any clogs, adjusting the water pressure valve, or installing a new shower head with higher pressure capabilities.


How can I increase the water pressure of my shower head to achieve a high-pressure shower experience?

To increase water pressure in your shower head for a high-pressure experience, you can try cleaning the shower head, removing any blockages, checking the water flow restrictor, and ensuring the water supply valve is fully open. If these steps don't work, you may need to consider installing a new shower head designed for high pressure.


If you replaced both cartridges on a shower valve due to very low water pressure and still no water pressure you removed cartridges and turned water on and water pressure is good?

May be build up in the valve itself or the shower head.


How do you keep shower temperature from changing when someone flushes the toilet or uses another sink?

Your water pressure is low. Consequently, when cold water is diverted to another application such as a toilet or a sink, the amount of cold water available at the shower mixing valve decreases as the low pressure is unable to keep up with the shower's demand. This causes a hotter mixture at the shower head. The solution is to either improve the cold water supply to the shower or to replace the shower control valve with a temperature compensating type. Pressure balancing is the cheapest and simply changes the shower temperature according to the pressure in the cold and hot water lines. When the toilet or sink is used, reduced pressure to the shower valve is detected and the valve reduces the hot water pressure, thereby maintaining the temperature. The more sophisticated approach is a thermostatic shower control valve. These are significantly more expensive, but will not reduce the pressure at the shower head (a drawback of the pressure balancing valve). The thermostatic valve would be required when one shower control valve is operating several shower heads. Moen, Kohler and Delta all make both types of control valves. They can be readily obtained from a local plumbing supply house.


The hot water pressure in the shower is still low after replacing the valve stem and seat?

Open up the actual shower head and remove the factory fitted restrictor.


Can you add an extra shower head to your shower just by cutting a tee into the shower head riser or will you lose pressure to both heads?

Yes, you can install a tee in the riser. The pressure loss will be minimal since both shower heads will have a flow restrictor unless you remove them. If you remove them, you probably wont notice any difference. If you do notice a difference, put the flow restrictor back in the closest shower head to the shower valve.


How can I increase the pressure in my shower head?

To increase the pressure in your shower head, you can try cleaning the shower head to remove any mineral deposits that may be blocking the flow of water. You can also check the water pressure in your home and adjust it if necessary. Additionally, installing a high-pressure shower head or a shower head with a smaller nozzle size can help increase the pressure.


How can I increase the pressure of my shower head?

To increase the pressure of your shower head, you can try cleaning the shower head to remove any mineral deposits that may be blocking the flow of water. You can also check the water pressure in your home and adjust it if necessary. Additionally, installing a high-pressure shower head or a shower head with smaller nozzles can help increase the pressure.


What shower heads have the strongest spray for a really good shower?

The force of the spray from a shower head has more to do with the water pressure delivered by your plumbing. Some shower heads do have a valve that allows pressure to build in the shower head, thus delivering a more powerful spray, but sufficient water pressure would be necessary from the source. Visit the home improvement store and talk about the various options with a knowledgeable salesperson.


How can I add a handheld shower head to a bathtub?

To add a handheld shower head to a bathtub, you can install a diverter valve on the existing tub spout. This valve allows you to switch between the regular tub spout and the handheld shower head. Simply attach the handheld shower head to the diverter valve, and you'll be able to enjoy the convenience of a handheld shower in your bathtub.


How can I increase the water pressure in my shower with a new shower head?

To increase water pressure in your shower with a new shower head, choose a model specifically designed to boost pressure, such as a high-pressure or low-flow shower head. These types of shower heads can help increase the force of the water flow, resulting in higher water pressure during your shower.


What would cause low pressure in a shower when you have replaced the hot water line out of the water heater?

you have trash in your line take the shower head off and remove trash or possibly in water valve at shower