0
What else can I help you with?
What describes an authorized worker in the lockout tagout program?
ensure that their locks and tags remain in place during their part of the lockout/tagout procedure
Who reviews and approves lockout or tagout programs at USF installations?
ground safety
Whose responsibility is it to conduct lockout tagout program assessments?
Ground Safety
Which osha standard is titled the control of hazardous energy lockout tagout?
29 CFR 1910.147
What Disconnecting or making the equipment safe involves the removal of all energy sources and is known as?
Lockout-tagout.
What is the best description of performing Step 5 Verify in the Lockout tagout procedure?
verify that the hazardous energy has been controlled. Verify the mechanical integrity of the energy-isolation device and verify the de-energization of the machinery and equipment (zero-energy state). Perform required test, specific to the machinery and equipment, such as zero-voltage verification, to ensure that isolation has been achieved and that stored hazardous energy is relieved. A worker performing electrical verifications shall be a qualified energized electrical worker in accordance with AFI 32-1064. Restore all operating controls to the neutral or off position. If independent verification is required, that task must be completed at this point in the process
What is an accepted method of isolating hazardous energy sources within a confined space?
Lockout/tagout procedures are commonly used to isolate hazardous energy sources within confined spaces. This involves physically securing energy isolation devices with locks and tags to prevent accidental re-energization of equipment. Additionally, proper training for workers on lockout/tagout procedures is essential to ensure safety during maintenance or repair work.
What chapter of afosh 91501 is titled hazardous energy control lockout tagout and mishap prevention signs and tags?
Chapter 21
What chapter of AFOSH 91-501 is titled hazardous energy control lockout tagout and mishap prevention signs and tags?
chapter 21
What is OSHA's lock out and tagout procedure?
Proper lockout tagout practices safeguard workers from the release of hazardous energy. Workers must be trained in the function of the energy control program and have the skills required for safe application usage and removal of the energy control devices.
What is the general criteria for performing a lockout and or tagout procedure within AFOSH 91501 Chapter 21?
locks and tags must clearly indicate that the operation of the energy- isolating device is prohibited
What are the general criteria for performing a lockout and or tagout procedure within AFOSH 91-501 Chapter 21?
locks and tags must clearly indicate that the operation of the energy-isolating device is prohibited
