0
You are constructing a chain link fence you have a 4 feet gate how far apart do you place the posts for the gate?
It is not an exact science. When I built mine I measured from where the post would be sitting on the hinge side to where I needed the post to sit so that the gate closer would hit it right. There are several different kinds of locking closers available and it depends on the type that you have. If it is a tad bit long that it ok bc usually you can adjust it somewhat. That is how I did it anyway and it turned out fine. You just dont what it too short then you wont be able to fit the gate. I assembled the gate first then took the measurements. Hope this helps you. Good luck.
What else can I help you with?
What are the steps involved in chain link fence replacement?
The steps involved in chain link fence replacement typically include removing the old fence, preparing the area for the new fence, installing new posts and rails, attaching the chain link fabric, and securing the fence in place.
How can I repair a chain link fence How to fix a chain link fence?
To repair a chain link fence, start by removing any damaged sections of the fence. Then, straighten out the chain link fabric and reattach it to the fence posts using new tension bands, bolts, and nuts. Finally, secure the fence fabric in place with tension bars and tighten any loose connections.
How can I fix a chain link fence?
To fix a chain link fence, you can start by identifying the damaged areas and removing the old or broken parts. Then, you can replace the damaged sections with new chain link material and secure them in place using fence ties or bolts. Finally, make sure the fence is properly tensioned and secure to ensure it is sturdy and functional.
How can I effectively stretch a chain link fence?
To effectively stretch a chain link fence, start by loosening the tension bands and removing any excess slack in the fence. Then, use a fence stretcher tool to pull the fence taut and secure it in place with new tension bands. Repeat this process along the length of the fence until it is properly stretched and secure.
What safety measures should be taken when constructing a leaning fence?
When constructing a leaning fence, it is important to take safety measures such as wearing appropriate protective gear like gloves and safety goggles, ensuring the ground is level and stable, using proper tools and equipment, and having a helper to assist with lifting and securing the fence. Additionally, following manufacturer's instructions and guidelines for installation can help prevent accidents and ensure the fence is securely in place.
How to fix the bottom of a chain link fence?
To fix the bottom of a chain link fence, you can start by digging a trench along the bottom of the fence line. Then, insert new tension wire or bottom rail and secure it in place with tension bands and bolts. Finally, backfill the trench with soil to secure the bottom of the fence.
How to take apart a vinyl fence?
To take apart a vinyl fence, start by removing the screws or fasteners holding the panels in place. Use a screwdriver or drill to loosen and remove the screws. Once the panels are detached, carefully lift them out of the posts. Repeat this process for each panel until the fence is completely disassembled. Be sure to store the panels and hardware in a safe place for future use or disposal.
How can I take apart a vinyl fence?
To take apart a vinyl fence, start by removing the screws or fasteners holding the panels in place. Use a screwdriver or drill to loosen and remove the screws. Once the panels are detached, carefully lift them out of the posts. Repeat this process for each panel until the fence is completely disassembled. Be sure to wear gloves and protective eyewear for safety.
Does a fence post need to be place every four feet?
A fence post does not necessarily need to be placed every four feet; the spacing can vary depending on the type of fence and the materials used. For example, wooden fences often have posts spaced 6 to 8 feet apart, while chain-link fences may require posts every 10 feet. It's important to follow manufacturer guidelines and local building codes for optimal stability and support.
You want to put up a horse fence 54' x 54' how many posts do you need?
How many posts you need for a fence 54 x 54 depends on how far apart you wish to place the posts. Usually posts are placed every 6 - 8 feet, but stallion paddocks frequently have posts placed every 4 feet apart. It's not clear to me how many linear feet your fence is, because the question is written as if the fence is 54 feet high and 54 feet long.
How do you hang a wooden sign on a gate?
Areyou talking about a wooden sign on a chain link gate? If so use some plumber's strap and fasten to back of sign, place on fence and fold over strap over the chain link material.
Getting a strong fence helps keep your lawn safe?
Keeping one's lawn safe from destruction is one of the primary purposes of getting a fence. It is important that everyone considers what type of fence they are going to get before they make the purchase though. They should consider getting a chain link fence in most cases. This is a very common type of fence, and it will not look out of place on most properties. It is also a good idea to keep in mind that payment per yard of fence is common, so carefully consider how much fence will be needed and which areas need to be covered.
