0
You shut the water off and the fill valve is the type that is in the corner of the tank and the float rides up and down on a shaft? If so, a piece of rust or mineral is plugging the valve. Shut the water off, hold the shaft of the fill valve and twist the top 1/8 turn counter clockwise. The top will come off and where it separates, there is a black washer with a small rod in the center of it. Take the washer out and slightly turn on the water. This will flush out any particles in the line. Shut the water off, replace the washer and put the top back on. This should fix the problem.
What else can I help you with?
How can I fix the issue of running water in my toilet tank?
To fix running water in your toilet tank, you can try adjusting the float valve or flapper. The float valve controls the water level, while the flapper seals the tank. Check for any leaks or debris that may be causing the issue. If necessary, replace the faulty parts to stop the running water.
How can I fix a running toilet tank?
To fix a running toilet tank, you can start by checking the flapper valve and chain to ensure they are properly aligned and not damaged. You can also adjust the water level in the tank to prevent continuous running. If these steps do not work, you may need to replace the flapper valve or other components in the tank.
Why does the toilet run constantly and how can it be fixed?
A toilet runs constantly when there is a leak in the tank or the flapper is not sealing properly. To fix it, you can adjust the flapper chain, replace the flapper, or check for any leaks in the tank and repair them.
Why is my toilet tank leaking and how can I fix it?
Your toilet tank may be leaking due to a faulty flapper or valve. To fix it, you can try adjusting the flapper chain, replacing the flapper, or tightening the valve. If these solutions don't work, you may need to call a plumber for further assistance.
Why is my toilet barely flushing and how can I fix it?
Your toilet may be barely flushing due to a clog in the drain, a problem with the flapper or chain in the tank, or low water levels in the tank. To fix it, you can try using a plunger to clear any clogs, adjusting the flapper or chain, or checking and adjusting the water level in the tank. If these solutions don't work, you may need to call a plumber for further assistance.
How can I fix a toilet with water running continuously?
To fix a toilet with water running continuously, you can try adjusting the float valve or flapper in the tank. If that doesn't work, you may need to replace the flapper or the fill valve. If you're unsure how to do this, it's best to contact a plumber for assistance.
How can I fix a toilet that runs for 5 seconds and then stops?
To fix a toilet that runs for 5 seconds and then stops, you can try adjusting the water level in the tank by adjusting the float or flapper. If that doesn't work, you may need to replace the flapper or the fill valve.
Why does my toilet water keep running, and how can I fix it?
Your toilet water may keep running due to a faulty flapper or fill valve. To fix it, you can try adjusting the chain on the flapper or replacing the flapper or fill valve if necessary.
Why is my toilet leaking from the tank and how can I fix it?
Your toilet may be leaking from the tank due to a faulty flapper or valve. To fix it, you can try replacing the flapper or adjusting the valve to stop the leak. If the issue persists, you may need to seek professional help from a plumber.
Why is my toilet not flushing properly and what can I do to fix it?
Your toilet may not be flushing properly due to a clog in the drain pipe, a malfunctioning flapper or fill valve, or insufficient water in the tank. To fix it, you can try using a plunger to clear the clog, adjusting the water level in the tank, or replacing the flapper or fill valve if they are damaged. If these solutions do not work, you may need to call a plumber for further assistance.
Why does my toilet not flush all the way and how can I fix it?
Your toilet may not flush all the way due to a clog in the drain, a faulty flapper valve, or low water level in the tank. To fix it, you can try using a plunger to clear the clog, adjust the water level in the tank, or replace the flapper valve if it is not sealing properly. If these solutions do not work, you may need to seek help from a plumber.
Why is my toilet running and how can I fix it?
Your toilet may be running due to a faulty flapper or fill valve. To fix it, you can try adjusting the water level in the tank, replacing the flapper or fill valve, or checking for any leaks in the system. If you are unsure, it may be best to consult a plumber for assistance.
