you use dots and dashes in the Morse code
Morse clicks, called Morse code, are dots and dashes. Dots are the short clicks, while dashes are longer. Morse clicks, called Morse code, are dots and dashes. Dots are the short clicks, while dashes are longer.
Samuel Morse developed Morse code for transmitting data using a series of dots and dashes.
Actually Morse's original code used dots, dashes, long dashes, and very long dashes. It also used 5 different lengths of gaps. This was greatly simplified by the adoption of the International Morse Code (largely developed in Germany then modified a bit by international agreements) to just dots and dashes. The number of different length gaps was also reduced to only 3.
Morse code
Dots and dashes in code are commonly referred to as "Morse code." In this system, dots represent short signals, while dashes represent longer signals. Morse code is used to encode letters, numbers, and punctuation marks for communication, especially in telegraphy and radio transmissions. Each letter of the alphabet corresponds to a unique combination of dots and dashes.
they used songs to decipher words and the different tunes were in the dots and dashes.
Morse Code
Morse code
Dots would last only a short amount of time on a Morse code machine and dashes would be three times that length.
To encode "2" in Morse code, you would use "..---". Each digit in Morse code is represented by a unique combination of dots (.) and dashes (-), and for the number two, it consists of two dots followed by three dashes. Morse code can be transmitted audibly, visually, or via radio signals.
Three dashes in Morse Code mean the letter O. 3 dots, followed by 3 dashes, followed by 3 dots is Morse Code for SOS.
Morse Code is a system of dots and dashes associated with sending a telegram.