answersLogoWhite

0

Go ahead and re-wire away! Your biggest problem might be in finding end connectors that'll fit the RG-11. Otherwise, it's 75 ohm cable and compatible. dude rg-11 is way over kill that is primarily used for drops that are over 200 feet long.you would be fine just using rg-6 cable because it would be alot eaier to use behind your wall plates.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What kinds of products would a Cable maker produce?

A Cable maker would produce wires and cable which have lots of different purposes and functions. The first is that you can use the cable to tie back wires and there are also lots of others such as wiring for a plug.


Can you communicate back to the cable company from your cable box?

, The cable box communicates back to the computer system at the cable company, and that's about all it does. It'll send back info like a PPV movie you ordered with your remote control, subscription to special events, etc. It's what you would call a closed system.


Where would you locate a speedometer cable on a 91 Pontiac Firebird if the instrument cluster plugs in?

The cable is manual drive on a 1991.It plugs directly in the back of the speedometer.


How to rewire a house effectively and safely?

To rewire a house effectively and safely, follow these steps: Turn off the power to the house at the main circuit breaker. Plan the new wiring layout and create a detailed diagram. Remove old wiring carefully, making sure to disconnect all connections. Install new wiring following local building codes and safety standards. Use proper tools and equipment, such as wire strippers and electrical tape. Test the new wiring before turning the power back on. Have a licensed electrician inspect the work to ensure it meets regulations.


How can you watch Raptors basketball or tennis without cable?

plug the cable back in


Where does the speedometer hook up to on an 88 Pontiac lemans?

The speedometer cable connects between the transmission and the back of the instrument cluster. To get at the back of the instrument cluster, it would be easiest to remove it. You actually can lay under the dash and remove the cable by pinching the connector at the back of the instrument panel and gently pulling it off. If you kink the cable, it will be ruined, but it's fairly strong. Just don't yank on it. At the transmission end, the cable can be unscrewed from the top of the transmission.


Where do your put USB CABLE to have Xbox live on a Xbox 360?

You don't use a USB CABLE. You use an ethernet cable from the back of your computer and plug it in the back of your XBOX360 to have XBOX LIVE. :)


How do you replace a 2005 Chevy Trailblazer shift cable?

Buy the Cable , then remove the screws that hold the broken cable and attach the new cable back.


Can you use any coax cable for satellite tv?

This would depend upon your TV and the receiver and if it has a coax port available on the back. You can use an RG6 coax cable between the receiver and TV. Most newer HD receivers do not have a coax port on the back


What are the different types of cable rows and how do they differ in terms of muscle activation and effectiveness for building back strength and size?

There are two main types of cable rows: seated cable rows and bent-over cable rows. Seated cable rows primarily target the middle and lower back muscles, while bent-over cable rows engage the upper back and rear deltoids more. Seated cable rows are generally more effective for building overall back strength and size, while bent-over cable rows are better for targeting specific areas of the back. Both exercises can be beneficial when included in a well-rounded back workout routine.


will Nina be back in house of Anubis?

people say she would come back but we dont know for sure by mossywayne


How do you rewire a radio in a Mitsubishi eclipse 1993?

You don't need to rewire the deck. DONT CUT your stock plug off, but go to napa, autozone, shocks whatever and buy a stereo plug, they are color coded with a diagram, then connect the wires. if you're dealing with the problem of relacing the radio after someone has cut the wires to steal it then you might have to salvage the end from a salvage yard and then rewire it back in if you need help wiring goto www.the12volt.com the have diagrams