Disassemble a bic pen

Answer 1

Alright, darling, first grab that pen and twist the top off. Then, use a pair of pliers to pull out the ink cartridge. Finally, unscrew the bottom of the pen to release the spring and any remaining pieces. Voilà, you've successfully disassembled a Bic pen!

Answer 2

To disassemble a Bic pen, first remove the cap and any additional attachments such as a clip. Next, carefully unscrew the top part of the pen from the bottom barrel. Inside, you will find the ink cartridge, which can be removed by gently pulling it out. Be cautious not to damage the cartridge or any other components during disassembly.

Answer 3

Oh, dude, you want me to break down a Bic pen for you? Like, okay, you can start by pulling off the cap and removing the ink cartridge. Then, just grab some pliers and gently twist and pull the top and bottom halves apart. Voila! You've successfully disassembled a Bic pen. Now go impress your friends with your newfound pen knowledge.

Answer 4

It depends of the type of bic pen you are using. I recommend round stic or rounc stic grip. First remove the cap. The pen consist of the barrel and the tip. Try to pull out the tip with your hands, but when you can't, just wrap the pen with a thick sheet of fabric and use pliers to pull it out. If you use pliers without wrapping it in thick fabric, you will damage the pen. Once the tip is out, a long ink cartridge will be attached to it. If you look at the other end of the pen, there is a cap. Insert any stick-like object such as chopsticks in the barrel of the pen and with the chopsticks face down, smash it on a hard surface to pop the cap out. This part may be hard, and in some cases dangerous. You could also try to pry the cap out with your finger nails, or just cut the barrel shorter to get rid of the cap. For this part, try to avoid the bic pens that have moy written on the barrel/tube part, as the cap is hard to remove. The last part is hard to do, and it may be dangerous. Back to the ink cartridge, carefully twist off the plastic part that surrounds the tip. If you cant twist it off, use pilers and wrap the pen in thick fabric. BE careful, as you may break the ink cartridge while doing this and create a mess. Once you finish this, you have a disassembled bic pen where you can use it to make a double sided pen for pen spinning, or shorten the whole pen itself to make a smaller bic pen.

Lastly, when you buy pack of bic pens, there are some that are easier to disassemble than others, even if they are the same type.