0
What else can I help you with?
What is the difference between repeater and bridge?
Relevant answers:Difference_between_bridge_and_repeaterDifference_between_bridge_and_repeaterA bridge acts as "bridge" between two networks or network subnets. A repeater merely strengthens the signal. You can have a repeater that only acts on one wire.Discuss_the_differences_between_hubs_repeaters_bridges_and_switchesDiscuss_the_differences_between_hubs_repeaters_bridges_and_switchesA repeater amplifies a signal. It will also re-send the signal as a "clean" signal. A hub is a multiport repeater. It will send a signal it receives out, through all of its ports - except the port...Difference_difference_between_Bridge_and_GatewayDifference_difference_between_Bridge_and_GatewayBridge is a interface between two or more separate collision domains (limits broadcast to devices connected onto that port only). While Gateway is exit or entrance point to a network and performs...What_is_the_difference_between_a_Hub_and_a_RepeaterWhat_is_the_difference_between_a_Hub_and_a_RepeaterA hub is a multi-port repeater. Therefore, the difference is that a repeater has only 2 ports and a hub has more than two ports. Other than that, they operate identically.What_is_the_difference_between_hub_and_repeaterWhat_is_the_difference_between_hub_and_repeaterHUBS: it is asimplest connectivity device that is used to extend a network. all the networks require a central junction called as hub. there are 3 types of hub; passive, active and intelligent...
What is dffrence between brige and repeater?
A network bridge joins two networks to make one. A network repeater extends one network to make it larger/more powerful.
What is the difference between optical amplifier and repeater?
Difference between Amplifier and Repeater 1. Amplifier is used to magnify a signal, whereas repeater is used to receive and retransmit a signal with a power gain. 2. Repeater has an amplifier as a part of it. 3. Sometimes, amplifiers introduce some noise to the signal, whereas repeaters contain noise eliminating parts.
What is the difference between regenerator and repeater?
In packet networking, a re-generator takes the existing radio signal and boosts it whereas a repeater interprets the data and re-sends it.
Difference between flyover and overhead bridge?
Boxgirder bridge
Switch hub bridge router and repeater?
WikiAnswers cannot answer a statement.
What is the difference between a barrel connector and a repeater in terms of data transmission over bus topology network?
jb
What is the difference between a suspension bridge and a truss bridge?
giant cables and abutments
For a Paintball Marker CO2 tank Which is better A Repeater Valve or an On SLASH Off Valve?
A repeater valve is so much cheaper. So go with that one anyway. But whats the difference between the two?
What is an amplifier repeater?
A repeater that does not distinguish between noise and signal; it amplifies both.
Is repeater an amplifier?
A repeater that does not distinguish between noise and signal; it amplifies both.
What is the difference between length and span of a bridge?
The span is the distance between supports. The sum of the span lengths is the bridge length.
