you have to use a lubricant based oil and not a petrol based oil
lithium grease or bearing grease
A roller garage door is a door for ones garage. It is called a roller garage door because the door operates with rollers on a track frame that allows the door to open and close.
To replace a malfunctioning closet door roller, first remove the door from the track by lifting it up and out. Then, unscrew the old roller from the bottom of the door and replace it with a new one. Finally, reattach the door to the track by sliding it back into place.
Apply grease to the hinges, rollers, and tracks of your garage door to keep it running smoothly.
ball bearings and lubrication.
To remove the roller from the sliding door of a Toyota Estima, first, ensure the door is fully open. Locate the screws or clips that secure the roller assembly, usually found at the bottom of the door. Remove these fasteners and gently lift the roller out of its track. If necessary, consult the vehicle’s manual for specific instructions related to your model year.
grease
For lubricating your garage door opener, it is recommended to use a lithium-based grease.
Roller shutters are shutters that are mounted above a door or window and can be rolled down to provide a shield of protection for the door or window as needed. If you want to install a Roller shutter in your shop, you can contact Shutter repair.
Use a silicone-based spray lubricant. It's a top choice because it repels moisture and doesn't attract dust or dirt, leading to smoother, quieter operation. You can also use white lithium grease, which is good for metal parts but can be a bit messy.
Lubricate the door hinges & door stop with a good spray white lithium grease.
You need to replace the guide roller located on the lower portion of the door. The plastic roller probably dried out and broke off.