what is meant by camber? What are the standards in the Lattice bridge, Truss & rafter fabrications
If the reference is to building/construction, the reader must mean "ceiling truss". If that is the given: ceilings in residential spans (8' to 16') were customarily framed with sawn lumber, 2x6, 2x8, 2x10 and 2x12, depending on whether support for a floor above or no. With the advent of Engineered Lumber (in the mid fifties), longer spans with flatter ceilings could be achieved. Starting with Sanford Truss and Gang-Nail Systems (the first patents), wood webbed, metal gusseted trusses were used as ceiling members, eliminating intermediate bearing (span exterior wall-to-exterior wall) with no sacrifice in integrity. Later, (mid 60's) Troutner patented the Trus Joist (not really a truss (an open web member) but more than a joist). The Trus Joist had the strength of a truss, stiffness needed for long spans and the straightness desirable for flat ceilings (a truss needed to have camber). The camber was difficult to control and caused concavity.
As far as i can tell there are 27 different types of truss bridges (i.e. Brown truss, Bowstring truss, Kingpost truss, Long truss, and Pratt truss). Hope this helps :D
Camber can be increased by using flaps.
Camber Corporation was created in 1990.
Saint Camber was created in 1978.
Camber the Heretic was created in 1981.
To adjust the camber on a 2001 Ford Ranger, first, you'll need to check the current camber angle using a camber gauge. If the camber is off, you can make adjustments by modifying the upper control arm or using camber adjustment bolts if equipped. Additionally, some Rangers may require shims to correct the camber angle. After making adjustments, recheck the camber to ensure it's within the manufacturer's specifications.
a truss
trussesWarren truss bridge
the truss
Saint Camber by Katherine Kurtz has a total of 528 pages.
Camber the Heretic has 491 pages.