0
What else can I help you with?
What common truss types used in bridges?
The type of bridges are: -truss bridge -arch bridge (truss arch bridge) -suspension bridge (suspension truss bridge) -cantilever bridge
What are the common reasons for a lockout suspension on a bike and how does it affect the overall performance of the bike?
Common reasons for a lockout suspension on a bike include a malfunctioning lockout mechanism, low air pressure in the suspension system, or a damaged suspension fork. A lockout suspension affects the overall performance of the bike by reducing the ability of the suspension to absorb bumps and impacts, resulting in a less comfortable and controlled ride.
Is muddy a suspension or colloid?
Muddy water is a suspension because the particles in a suspension are small, not settled, and separate if left undisturbed like in the most common kind of suspension made of silt and water.
What are the differences between cantilever and disc brakes in terms of performance and functionality?
Cantilever brakes are typically found on older bikes and provide good stopping power, but can be more difficult to adjust. Disc brakes are more common on modern bikes and offer better performance in wet conditions and require less maintenance. Overall, disc brakes are considered to be more efficient and reliable than cantilever brakes.
Is muddy water a solution suspension or colloid?
Muddy water is a suspension because the particles in a suspension are small, not settled, and separate if left undisturbed like in the most common kind of suspension made of silt and water.
What do struts and shocks have in common?
They are both used in the suspension systems of vehicles.
What is Ivan Dan when referring to off road trucks Such as Ivan Dan Suspension or Fiberglass Fenders?
It is an older suspension product that was either developed or bought by FabTec and is common on older long travel suspension trucks.
What are the disadvantages of the cantilever bridge?
Advantages of cantilevers -Building out from each end enables construction to be done with little disruption to navigation below. The span can be greater than that of a simple beam, because a beam can be added to the cantilever arms. Cantilever bridges are very common over roads. Because the beam is resting simply on the arms, thermal expansion and ground movement are fairly simple to sustain. Cantilever arms are very rigid, because of their depth.Disadvantages of cantilevers - Like beams, they maintain their shape by the opposition of large tensile and compressive forces, as well as shear, and are therefore relatively massive. Truss construction is used in the larger examples to reduce the weight.
What are the differences between V brakes and cantilever brakes, and which one is more suitable for my bike?
V brakes and cantilever brakes are two types of bicycle brakes that differ in their design and performance. V brakes are mounted on the frame and fork of the bike, providing better stopping power and modulation. Cantilever brakes are mounted on the fork and seat stays, offering more clearance for wider tires and fenders. The choice between V brakes and cantilever brakes depends on your bike's frame and intended use. V brakes are more common on modern bikes and are suitable for most riding conditions. Cantilever brakes are better for bikes with limited clearance or for off-road riding where mud clearance is important. Consider your bike's design and your riding style to determine which brake system is more suitable for you.
Your 1999 accord sedan has a lot of clunking noise in the front end of the car is this common?
No, not common, inspect all suspension components.
What wear and tear issues are common in used Ford F150s?
Transmission is fairly common due to towing. also check the suspension.
What are the common causes and solutions for a suspension oil leak in a vehicle?
Common causes of a suspension oil leak in a vehicle include worn out seals, damaged hoses or fittings, or cracks in the suspension components. Solutions typically involve identifying and replacing the faulty parts, ensuring proper installation, and regular maintenance to prevent future leaks.
