Unsanded wood will have a "rougher" feel to it. The sanded wood should feel rather smooth.
Unsanded is not a word. The sentence below conveys the concept of unsanded. Wood that is not sanded is rough to the touch.
Wood is porous, it will have to be sanded.
there is no difference
The difference between wood and plastic is that the wood is opaque and the plastic is transparent.
Unshaped block of wood...
Surface planed but not sanded.
sanded 4 sides. yup
"Pulp wood" is the wood used for pulping. "Wood pulp" is pulp made from wood.
a spring wood has blossom in it but a summer wood is just green
To clean sanded wood effectively, start by removing any dust with a vacuum or damp cloth. Then, use a wood cleaner or a mixture of water and vinegar to wipe down the surface. Make sure to dry the wood thoroughly afterwards. You can also apply a wood polish or wax for added shine and protection.
Laminate floors are manufactured, a thin layer of wood or Formica is glued to a backer. The surface is only about 1/16th of an inch thick and the whole board is about 3/8 inch thick. Hardwood floors are all wood and 5/8 to 3/4 inch thick. Oak is the most common but there are many different types of wood available. They can be sanded and refinished several times over a long period of time. Laminate can not be sanded and had a hard factory coating that resists staining more than hardwood.
Ships in the 1500's were made of wood. This wood was carefully sanded and nailed together to be air tight.