4 yard
Tin thickness value is missing. The Thickness is 0.29 gauge metal.
301 yards
A yard is 3 feet, a foot is 12 inches. So a yard is 36 inches Therefore 0.250 of a yard is 9 inches
For what thickness and width? Typical finished and compacted asphalt concrete weighs 140 to 150 lbs per cubic foot. The density depends on how compact it is and what type, size, and percentage of aggregates are used. So a one yard by one yard cut of a typical local road (4" thickness) should weigh close to 450lbs
Its right around $85 a yard Its right around $85 a yard
There are 9 square yards in a cubic yard at a thickness of 3 inches. This is because there are 9 square feet in a square yard and 36 cubic feet in a cubic yard, so the area is 9 square yards if the thickness is 3 inches.
You cannot do that since cubic yard is volume and square foot is area. You need to know the thickness
Hard to find Jeep Liberty parts in a junk yard, so I'd say they are very good cars.
A yard of concrete covers about 3 feet. This is because a yard is generally equal to about 3 feet.
A cubic yard of concrete covers an area of 81 square feet when poured at a thickness of 4 inches. This is calculated by dividing the total volume of the cubic yard (27 cubic feet) by the thickness in feet (1/3 foot for 4 inches), resulting in 27 ÷ (1/3) = 81 square feet.
A yard of asphalt typically covers about 80 to 100 square feet at a thickness of 2 inches. The coverage can vary slightly depending on the specific type of asphalt and its compaction. For more accurate calculations, it's essential to consider the desired thickness of the asphalt layer.
The weight of one square yard of crushed seashells will depend on the thickness and density of the crushed shells. On average, crushed seashells weigh around 1,500 to 2,000 pounds per cubic yard, so you can use this range to estimate the weight of one square yard based on the thickness of the layer.