answersLogoWhite

0

Dumb waiter

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Is a blender a pulley?

No, a blender is not a pulley. A blender is a kitchen appliance that uses rotating blades to mix, puree, or chop ingredients, while a pulley is a simple machine that is used to change the direction of a force or transmit motion.


What is a pulley used in the kitchen?

i have no idea ok ok its used for stirring


What are all of the simple machines in Edheads inside the kitchen?

screw, pulley, lever, wedge, inclined plane, gear


Where to find a pulley in your house?

A pulley is an instrument for drying laundry that is lowered from the ceiling to load then pulled up to th ceiling to allow the clothes to dry. ============================================ In our house, the best bet is always to start with the junk drawer next to the meat-silverware drawer in the kitchen.


How do i Press on a pulley to power steering pump?

One easy method is to clean the pulley and pump shaft. Put the pulley in the kitchen oven at about 250 degrees long enough to come up to temperature. Depending on the pulley material, you can go to much higher temperatures. You couldn't get a steel pulley hot enough to hurt it in a kitchen oven. For every degree you increase the temperature of the pulley, the pulley including the shaft hole, gets larger. If possible reduce the temperature of the pump shaft. Use ice or a CO2 fire extinguisher. This makes the shaft smaller. The effect of making the pulley and it's shaft hole larger, and the shaft smaller should place you where the pulley doesn't need to be forced on the shaft Get the pulley and pump close. Dry the pump shaft. Pick up the pulley with hot pads or heavy gloves and simply slide it on the shaft by hand. This should be one swift, smooth motion and done with out stopping. Every time the pulley touches the pump shaft it will lose heat. and the shaft will gain heat until the pulley stops sliding freely. The idea of doing this this way is to avoid forcing any part of the pump shaft and maybe damaging the pump. I once used a charcoal fire and a cast iron dutch oven to install a wheel bearing on my boat trailer while camping. It worked slick.


What is the name of the pulley on a 1997 dodge stratus 2.5 V6?

There is a crankshaft pulley, alternator pulley, power steering pump pulley, AC pulley, idler pulley, tensioner pulley, etc.


What is a compound pulley?

a coumpound pulley is when there is a fixe pulley and movable pulley working together


What is compound pulley?

a coumpound pulley is when there is a fixe pulley and movable pulley working together


Which simple machine can help us to move a sail on a sailboat?

pulley


What causes a pulley to wobble?

Things that might cause a pulley to wobble: The pulley is bent. The shaft the pulley is on is bent. The pulley is mounted crooked.


What is the velocity ration of a pulley?

The velocity ratio of a pulley system is the ratio of the rotational speed of the driving pulley to the driven pulley. It indicates how the speed of the driven pulley relates to the speed of the driving pulley. The formula is: Velocity Ratio = Diameter of driving pulley / Diameter of driven pulley.


Is a faucet handle considered a pulley?

No, it is not a pulley. A pulley has to half effort.