0
From the NASA Landsat Image Mosaic of Antarctica, you can read that the ice ". . . averages more than one mile in thickness, but is nearly three miles thick in places."
What else can I help you with?
How thick can Antarctica ice get?
The maximum thickness of ice in the Antarctic ice sheet is 15,670 feet. It averages 7,300 feet on the eastern side and 4,285 feet on the western side.
How many squre ft will 1 cu yd cover 3 inch thick?
One cubic yard is equivalent to 27 cubic feet. To determine how many square feet it will cover at a thickness of 3 inches, convert inches to feet (3 inches = 0.25 feet). Then, divide the volume (27 cubic feet) by the thickness (0.25 feet): 27 ÷ 0.25 = 108 square feet. Thus, 1 cubic yard will cover 108 square feet at a thickness of 3 inches.
How many miles in thickness does Antarctica's sheets cover?
Not all of the Antarctic ice sheet has been measured for depth. At the South Pole, the depth of the ice is 2,700 meters or 9,000 feet; at Vostok, the depth of the ice is 3,488 meters or 11,444 feet. The thickness of the continent varies, depending on the location.
How many square feet will 12 cubic yards of gravel cover at two inch thickness?
744 Square Feet
How many square feet at 1 Mil thickness will 1 gallon of water cover?
21
How many sq ft does a yard of concrete cover concrete cover?
1 cubic yard covers 324 square feet per inch of thickness, divide 324 by thickness in inches to get coverage, i.e. 4 inches thick would cover 324/4=81 square feet, 36 inches thick would cover (you guessed it) 9 square feet.
How many square feet will 110 gallon of elastomeric coating cover?
176.4583/thickness of the coating, in inches
How thick can a glacier get?
Glaciers can range in thickness from around 100 feet to well over 3,000 feet, with some of the thickest glaciers in Antarctica reaching depths of over 15,000 feet. Thickness depends on factors such as accumulation rate, temperature, and pressure.
How many cubic feet would 1 ton of gold cover?
1 ton barmateck log=cft?
What averages 6-8 feet?
14
How many gallons will cover 875 feet by 7 ft high?
It depends on a number of factors such as the porosity of the surface, thickness of the coverage.
What will one ton of gravel cover?
Gravel averages 100 pounds per cubic foot or 20 cubic feet per ton. That's depth x width x length. So if you want to cover something 6 inches deep, you can cover 40 square feet of surface.
