To add Freon to a 2013 Chevy Malibu, first ensure the vehicle is turned off and parked on a level surface. Locate the low-pressure service port in the AC system, typically found on the larger diameter aluminum line. Attach the refrigerant can's hose to the port, then start the engine and set the AC to the maximum cool setting. Open the valve on the can slowly and monitor the pressure gauge until it reaches the recommended level. Be cautious not to overfill and wear safety goggles and gloves during the process.
where do I add freon to my air conditioning unit on a 1997 chevy truck?
to the low side
no
You always add freon to the low pressure side of the system. The low pressure side is always in the LARGE A/C line. On the 2000 Malibu it's against the firewall, look down between the firewall and the altenator, you will see the fitting down close to the bottom. Connect your line while the engine is off as the belt is very close. Good luck and be carefu!
You can add Freon to your 1999 Chevy cooling system through the low pressure port. Connect your Freon bottle to the low pressure port and release the Freon into the system.
that is the only place to add to it!
I have a2005 malibu and it has electronic steering no fluid needed
Freon is a very touchy thing to work with. The EPA bans its release into the atmosphere, so only experts and professionals know how to add and subtract Freon from the car safely. Take your car to a mechanic or a Chevy dealer for this.
in the over flow tank
Buy a kit at Wal-Mart or auto parts comes with instructions
no cap, just the coolant tank, add to this to add coolant../
Look inside the owners manual.