0
In order to build stairs the materials needed would be
- Framing square
- Nails or screws
- Circular saw
- Hand saw
- 2 x 6 lumber
- 2 x12 stringer
- Joist hangers
- Masking tape
- Tape measure
First you have to be familar with the 3 parts of stairs and its basic terminologies.
Stringer is a part of the structure which supports the stairs. There is at least 2 stringer on each side of the stairway.
Riser is the height of the stair and the vertical portion between steps.
Thread, which is the width of the stair and the part of the stair which is actually stepped on.
Total rise - the stair's vertical height from the landing to a location level with the height of the upper floor.
Total Run is the horizontal length of the stairway which is the edge of the staircase on the landing to the edge of the upper floor.
Next, design and measure your stairs.
Compute the total rise and you need to set a 2 x 4 on the deck or floor. Also ensure that it is level with a carpenter's level.
Decide the number of steps by dividing the total rise by 7.25. This value is widely accepted as a standard riser height. Round off the answer to get the number of steps.
Start computing the total run and avoid including the deck or the floor in your count. Therefore, if you have 9 risers, it means you will only need 8 threads.
Decide the height of each riser and then divide the total rise by the number of risers.
Lay out the stairs.
Lay out your stairs on the 2 x 12 stringers with a framing square. Mark the long arm and the shorter arm with a piece of masking tape. These will serve as your rise and run values.
Now, set the long end of the framing square to the direction of the end of the board and then align together the two marks and set the end of the board facing towards you. Draw the outline of the square.
Guide the framing square to the top mark and straighten the markings and start to mark the spot. Continue along the entire length of the stringer.
Next, cut the stringers.
Cut along the marked lines with a circular saw. Finish the cut with a hand saw.
Test for the accuracy of your measurements and calculations by test-fitting the first stringer. After that, use it as a template for marking the other stringers.
Then, assemble the stairs.
Join the stringers to the deck with joist hangers attached to the framing.
Set in the threads starting from the bottom. Use 3-inch nails or screws to secure them in place.
Rise, wash and repeat the procedure.
Hope this helps.
What else can I help you with?
How do you build stairs on sims three?
well i think you cant because i have neverseen a two story house on the sims three so you cant build stairs
How do you make stairs on sims 3?
go to the build mode and when you do the base of the house, there should be a small picture of stairs, if you click on that, it will bring up the stairs.
How can I build stairs without cutting stringers?
One way to build stairs without cutting stringers is to use pre-cut stair stringers that are adjustable to fit the desired height and width of the stairs. These adjustable stringers can be easily installed and provide a sturdy base for the stairs without the need for cutting.
On the sims 2 can you build stairs?
Yes, you can have stairs. In buy mode, you go to the stairs icon, and there you can choose from several staircases, or choose connecting stairs (like for a porch). You don't exactly build them yourself, but you can use them. Just place, use the arrows on the left to go up a floor (or page up), and build the next level. Up to four high (or you can't roof).
Show you how to build stairs?
The best place to get simple instructions on how to build a set of stairs is in the booklet that comes with a carpenters framing square. A Stanley brand square would come with booklet.
How do you measure to cut stairs?
http://www.ehow.com/how_2243502_measure-build-stairs.html
Can there be a up stairs on sims 2 for ps2?
I am asking you is there??? and no there isn't you have to have it for PC
Why do some stairs have steep slopes?
Usually, stairs are built with steep slopes only if there isn't enough room to build them with milder slopes.
How do you buy a staircase on the sims 3?
you go on build mode and click on th small porch steps
How can I build stone stairs on a hill?
To build stone stairs on a hill, you will need to first plan the layout and design of the stairs. Then, dig out the area where the stairs will go and create a sturdy base using gravel and sand. Next, place the stones in position, making sure they are level and secure. Finally, fill in any gaps with more gravel or sand to ensure stability.
How do you make steps on sims 3?
you go on build mode and there are a picture of stairs going up to a door if you click on them you pick your stairs and place them in you house
How can I build stairs with stringers?
To build stairs with stringers, first determine the number of steps needed and the height of each step. Cut the stringers to the desired length and attach them to the top and bottom of the stairs. Secure the steps to the stringers, making sure they are evenly spaced and level. Finally, add a handrail for safety.
