answersLogoWhite

0

In the middle of the unit is the pilot , while setting valve to pilot (note if u push down on the pilot valve u will here gas-do not hold for long or to much gas will accumulate) light within 1st five-10 secinds. If u dont light right away turn off and wait 5 minutes. Then try again, when pilot is depressed hold lighter above where gas line goes to center of heater. You should have heat-the green knob that says lo-hi is the adjustment. Turn to hi and the furnace should fire up...

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where was the pilot of The Walking Dead shot?

The pilot was primarily shot in and around Atlanta, Georgia.


How do you light the pilot on an octopus furnace?

How do I light pilot light on furnace


How do you turn on the pilot light on a gas appliance?

To turn on the pilot light on a gas appliance, locate the pilot light button or knob and turn it to the "pilot" position. Then, press and hold the button while using a long lighter to ignite the pilot light. Keep holding the button for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.


How do you turn on a pilot light?

To turn on a pilot light, locate the gas valve and pilot light knob on the appliance. Turn the gas valve to the "pilot" position and press down on the pilot light knob while using a lighter or match to ignite the pilot flame. Hold the knob down for a few seconds to allow the pilot light to stay lit, then release the knob.


How do you re-light the pilot light on an electric heat pump system?

Pilot light for what? There should be no pilot light on a heat pump. Is this another silly homework/exam question?


Why does the pilot light go out when the gas appliance is turned to the "on" position?

The pilot light goes out when the gas appliance is turned to the "on" position because the flow of gas is redirected from the pilot light to the main burner, causing the pilot light to extinguish.


Why does the pilot light go out?

The pilot light can go out due to a variety of reasons, such as a draft, a dirty or faulty pilot light assembly, or a lack of gas flow.


How do you start a pilot light on a gas appliance?

To start a pilot light on a gas appliance, you typically need to locate the pilot light button or knob on the appliance. Turn the knob to the pilot position and hold it down while you use a long lighter or match to ignite the pilot light. Keep holding the knob down for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.


Why does the pilot light keep going out on the stove?

The pilot light on the stove may keep going out due to a dirty or clogged pilot light assembly, a faulty thermocouple, or a lack of gas flow. It is important to clean the pilot light assembly and ensure proper gas flow to prevent the pilot light from going out.


How do you relight a natural gas pilot light?

How do you relight a natural gas pilot light?


Where is the thermocople located on the furnace?

At pilot light, pilot light flows around thermocouple.


How far is it from pilot mountain nc to atlanta ga?

340 miles