0
What else can I help you with?
What is the use of cooling tower in power plant?
first mention which power plant in steam pp out come of the steam is cooled after it again passes through into the turbine
What you get when steam is cooled?
Condensation and liquid water result from cooling steam.
What would cause the ac on a 2002 KIA Sedona to blow out white smoke and quit cooling then later start back cooling?
Is it possible that it was steam and not smoke? If the AC freezes up, it will stop cooling until it thaws. Then, it will being to operate again.
Why you use cooling towers in thermal power station?
This is to cool the steam turbine condenser, where the steam outlet from the turbine's last stage is condensed before returning to the boiler feed pump inlets. The cooling towers circulate water that passes through tubes inside the condenser, separate from the steam/water in the boilers.
Is a steam from a kettle reversible?
Yes, the process of steam forming from a kettle is reversible. Steam can be condensed back into liquid water by cooling it down. This change from gas to liquid is reversible and can happen repeatedly.
What is the piece of equipment that changes steam and oil vapour to liquid?
A condenser is the piece of equipment that changes steam and oil vapor to liquid. It works by cooling the vapor down until it reaches its dew point and condenses into a liquid form.
What part of a nuclear reactor uses steam to turn the generator turbine generator condenser cooling loop?
The steam generated in a nuclear reactor is used to turn a turbine, which in turn drives a generator to produce electricity. After passing through the turbine, the steam is condensed back into water in the condenser before being pumped back to the reactor as part of the cooling loop.
Steam is a form of what?
Steam is a vapor form of water when it reaches its boiling point and transitions from a liquid to a gas.
What is flow diagram of steam condenser?
A flow diagram of a steam condenser typically illustrates the process of condensing steam into water for reuse in a steam cycle. The diagram shows steam entering the condenser, where it comes into contact with cooling water, leading to heat exchange that cools the steam. As the steam condenses, it transforms into liquid water, which is then collected and often pumped back into the boiler. The cooling water, having absorbed the heat, is usually expelled or recycled back to a cooling system.
What could cause steam in your bonnet?
Cooling system leak or engine overheating and steam escaping from the radiator cap.Cooling system leak or engine overheating and steam escaping from the radiator cap.
What pollution do cooling towers produce?
None - the emissions from a cooling tower is nothing more than steam.
Do you call the process of heating water into steam then cooling it to puirfy it?
The process of heating water into steam and then cooling it to purify it is called distillation. During distillation, water is heated until it turns into steam, leaving impurities behind. The steam is then cooled and condensed back into purified water.
