The cost of a cedar shake roof typically ranges from $6 to $12 per square foot, depending on factors such as the quality of the shakes, installation complexity, and geographic location. For a standard 1,500 square foot roof, homeowners can expect to pay between $9,000 and $18,000 in total. Additional costs may arise from underlayment, flashing, and potential repairs to the underlying structure. It's advisable to obtain multiple quotes from contractors for a more accurate estimate.
Cedar shake is a popular choice for gable roofs due to its natural beauty, durability, and resistance to insects and rot. Additionally, cedar shake is energy-efficient, providing insulation and helping to regulate indoor temperatures.
The mission and primary objective of the Cedar Shake and Shingle Bureau is to install and sell environmentally friendly roof tiles. One can contact them through their website.
To install a cedar shake roof, start by preparing the roof deck with a layer of felt paper. Then, nail the cedar shakes in place, starting from the bottom and working your way up. Overlap each shake to ensure proper coverage and use a nail gun or hammer to secure them. Finish by adding ridge caps and trim for a polished look. Make sure to follow manufacturer instructions and local building codes for a successful installation.
To install a cedar shake roof properly, start by preparing the roof deck with a layer of underlayment. Next, lay the cedar shakes in overlapping rows, starting from the bottom and working your way up. Secure the shakes with nails or staples, making sure to follow the manufacturer's guidelines for spacing and placement. Finally, trim any excess overhang and apply a protective finish to seal and protect the wood.
To install cedar shakes on a roof, start by preparing the roof deck with a layer of felt paper. Then, nail the cedar shakes in place, starting at the bottom and working your way up. Overlap each shake to ensure proper coverage and use stainless steel nails to prevent rusting. Finish by trimming any excess shakes and applying a protective sealant to prolong the life of the cedar.
To install a cedar shake roof on your home, you will need to first prepare the roof by ensuring it is clean and free of any debris. Next, install a layer of roofing felt or underlayment to provide a base for the cedar shakes. Then, starting from the bottom, nail the cedar shakes in place, overlapping each row to ensure proper water drainage. Trim any excess shakes as needed and finish with a protective sealant to enhance durability and weather resistance. It is recommended to consult with a professional roofer for guidance and assistance to ensure proper installation.
no it will not work at all
One squarer of cedar (100 square feet) weights about 90 pounds for the cedar it's self.
Roofing on Mobile homes appears to be very much the same as on a regular house. I've seen 4-5 done and they do it exactly the same way. -Mine has a 'duroid tile' roof, my neighbor has a metal sheet roof (very expensive,but more long lasting) another neighbor (old logger) did his own cedar shake roof. So I would imagine that doing a vinyl roof would be the same as on a regular home.
High Treason!!
Roof coating is very expensive. Depending on the brand you buy, it can cost anywhere from $100 to $200.
A roof that is 10 x 20 has an area of 200 square feet. The cost to have this size roof shingled is approximately 1,800.00.