answersLogoWhite

0

Field, Neutral, Earth.

You only need a Field and Earth, the Neutral terminal can be left out.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is cost for 02 sensor on 2004 Honda Accord?

just for parts about £22 for a denso £25 for a bosch have a look on e-bay might get one cheaper


What are the chances of an alternator fuse going bad before the actual alternator on a Ford E-250 van?

good


What is the exact size of spark plug of Honda TMX 155?

Denso has published the following specifications for the spark plug suitable for the Honda TMX 155. Name of plug: Denso X24ES-U. This name is a code for certain specifications, for this plug they are the following: X means Hex size, in this case 12 x 18 mm. 24 is the heat range. E is the reach of the plug, in this case 19 mm without a gasket. S stands for a non-projected spark plug. U means a particular shape of the electrode, in this case a cut ground electrode.


Welcome to japan in Japanese writing banners?

日本へようこそ (nippon e yokoso)


Do you have to take the radiator out to replace the alternator on 1992 Ford E-150?

No you do not.


How do you replace the alternator on a 1998 Ford F-150?

Remove the neg battery cab;e then the wires on the alternator.. Disengage the belt and take the mounting bolts out of the alternator. There should be a routing schematic for the belt on the fan shroud.


How do you get the alternator out of a 1997 E-150 with the 4.2 eng?

You should remove the positive battery cable from your 1997 Ford F1 50 battery. Remove the alternator belt. Remove the wiring harness. Remove the alternator retaining bolts.


What is the size of the lower alternator mounting bolt on a 2005 Honda Civic?

You can find the size of the lower alternator mounting bolt on a 2005 Honda Civic on civicforums.com/forums/21-i-c-e-electrical/354635-diy-alternator-replacement.html


How do you remove alternator 1992 ford e 150 van 6cly?

To remove the alternator from a 1992 Ford E-150 van with a 6-cylinder engine, first disconnect the negative battery cable to prevent any electrical shorts. Next, remove the serpentine belt by loosening the tensioner pulley, then unbolt the alternator from its mounting brackets. Disconnect the electrical connectors and the battery cable from the alternator before carefully lifting it out of the engine bay. Reverse these steps to install the new alternator.


Where is the voltage regulator on a 1996 ford e 150 van located?

It's integral with the alternator.


What is form E?

e means e


What does l e you means?

"l e u" means love you