0
The average area of the Arctic sea ice cover fluctuates seasonally, typically around 7 million square kilometers at its minimum in September. The average thickness of Arctic sea ice varies, but it is generally estimated to be around 1 to 2 meters thick, with older, multi-year ice being thicker in some areas. Climate change has been causing a decline in both the extent and thickness of Arctic ice over the past few decades.
What else can I help you with?
How you calculate weight of MS sheet?
specific weight of the sheet * area *thickness = weight of the sheet
What is the unit weight of GI Sheet 1meter width and3Meter length?
It depends on the thickness of the sheet which usually comes in between 0.1 to 1 mm thickness. For the same area, the later one is 10 times more heavier than the former one. Now consider a sheet with 0.63mm thickness. As the density of the steel is 8, the weight of sheet would be 8*0.63=5.04 kg/sq. meter
Weight of polypropylene sheets?
The weight of polypropylene sheets can vary depending on the thickness and size of the sheet. As a reference, a 1/8 inch thick polypropylene sheet measuring 48 x 96 inches can weigh around 10-15 pounds. It is recommended to check the specific weight from the manufacturer or supplier for accurate information.
How many meter in 1 kg aluminium sheet?
Well, darling, an aluminum sheet doesn't have meters, it has thickness. The density of aluminum is about 2.7 g/cm³, so a 1 kg sheet would be about 370.37 cubic centimeters in volume. If you want to know the length of a side, you'll need to know the dimensions of the sheet. Hope that clears things up for you, sugar.
How do you calculate gross rock volume?
Gross rock volume (GRV) is calculated by multiplying the area of the reservoir by its average thickness. The area can be determined using geological maps or seismic data, while the thickness is obtained from well logs or seismic interpretation. The formula is: GRV = Area × Average Thickness. This volume helps in estimating the potential resources within a reservoir.
Is it colder in the Antarctic then arctic?
Yes, it is colder, by about 30 degrees F. Why? Antarctica is a continent covered with ice. The Arctic ice simply freezes over sea water. The ice area in the Arctic is significantly smaller than the ice sheet that covers Antarctica.
What is the Arctic's area?
From the north pole to the arctic circle. The area above the arctic circle. There is only one arctic area, but there is also an antarctic area, around the south pole.
What surface area of a lake could be covered by 4.5 litres of motor oil?
To determine the surface area that 4.5 liters of motor oil can cover, we first need to know the average thickness of the oil layer. Assuming a thickness of about 1 millimeter (0.001 meters), we can use the formula for volume (Volume = Area × Thickness) to find the area. By rearranging the formula, Area = Volume / Thickness, and substituting the volume (4.5 liters = 0.0045 cubic meters) and thickness, we find that the oil could cover an area of approximately 4.5 square meters.
How many cubic feet is a 4 foot by 8 foot sheet?
A 4ft x 8ft sheet is not a volume, it is an area, 32 square feet
How do you use Arctic as an adjective?
the area was arctic
What is the area of Arctic Bay?
The area of Arctic Bay is 247.5 square kilometers.
How many sheets in cubic meter?
There are no square metres in a cubic metre because they measure different things. Square metres measure area, cubic metres measure volume. Asking this question is like asking "how many metres are there in an hour?"
