0
What tab in the rapids device configuration tool does a ssm use to update the devices connected to the rapids workstation?
In the Rapids Device Configuration Tool, a System Support Manager (SSM) uses the "Device Management" tab to update the devices connected to the Rapids workstation. This tab allows for configuration changes, firmware updates, and monitoring of device statuses. By accessing it, the SSM can effectively manage and maintain the connectivity and functionality of the connected devices.
What else can I help you with?
When connectivity devices are connected in a daisy-chain fashion what type of backbone do they create?
When connectivity devices are connected in a daisy-chain fashion, they create a linear backbone topology. This configuration allows devices to be connected in sequence, where each device is linked to the next, forming a single path for data transmission. While this setup can be simple and cost-effective, it is vulnerable to failures; if one device or connection fails, it can disrupt the entire network.
Which network topology is complete disrupted when a key central device stops operating?
A star topology is completely disrupted when a key central device, typically a hub or switch, stops operating. In this configuration, all devices are connected to the central device, and its failure means that communication between all connected devices is halted. Without this central point, the network becomes inoperative, preventing data transmission.
Do older USB devices run faster when connected to a new USB port?
No, older USB devices do not run faster when connected to a new USB port. The speed of the device is determined by the device itself, not the port it is connected to.
What devices connect devices together in a ring topology?
In a ring topology, devices are connected in a circular fashion, and the primary device used to connect these devices is a network switch or a repeater. Each device is linked to exactly two others, forming a closed loop for data transmission. Data travels in one direction around the ring, and if one device fails, it can disrupt the entire network unless a dual-ring configuration is implemented for redundancy.
How are the devices connected on a bus network?
Devices on a linear bus network are connected to each other via a wire, usually through a T-connector device. In effect, the devices are "daisy chained" together without any other device connecting them.
What are two name of input device that must part of workstation?
Two essential input devices that are typically part of a workstation are a keyboard and a mouse. The keyboard allows users to input text and commands, while the mouse enables navigation and interaction with graphical user interfaces. Both devices are crucial for efficient and effective computer operation in a workstation environment.
What 2 ways can devices be connected to a circuit?
Devices can be connected to a circuit in two primary ways: in series and in parallel. In a series connection, devices are linked one after another, so the same current flows through each device, and if one device fails, the entire circuit is interrupted. In a parallel connection, devices are connected across the same voltage source, allowing each device to operate independently; if one device fails, the others continue to function.
Which device sends data packets to all connected devices in a network?
Hub
How many peripheral devices can be connected to a single USB port?
On a typical setup, only one device can be connected to the ports. However, if you have a special USB port, or a device that will split a USB port, you can connect 2 or more devices.
What devices are generally configured in the PC Setup program?
System configuration, Boot order, Boot (start-up) configuration and docking-device configuration settings, Basic device configuration settings, Battery charge status and System security and hard-drive password settings
Is a usb a portable device?
USB is a kind of communication port. Many portable devices have this port and can be connected this way to other devices.
How can you discover disconnected hardware or connected hardware to the motherboard without opening the case?
You can check what devices are connected in Device manager in windows.
