On a 1996 Ford Crown Victoria, the idle air control (IAC) sensor is located on the throttle body. It is typically found on the side of the throttle body assembly and is secured with two screws. To access it, you may need to remove the air intake duct and other components for better visibility and reach. Always consult a repair manual for detailed instructions specific to your vehicle.
You have an idle air control valve and you also have a throttle position sensor. They are both located and the throttle body.
Speed Sensor The sensor is located on the rear axle housing.
Idle air control valve sensor is located around the carburetor .
Idle air control valve sensor is located around the carburetor .
There is no such part as an idle sensor. Idle speed is a computer output that involves dozens of inputs.
There is not an "IDLE" sensor.The engine computer sets and adjusts the idle speed.If the idle speed won't settle down you need to have the computer scanned to determine the causeBUTVery often with this problem the throttle body is dirty and just needs cleaning.
idle speed controll or tps throttle sensor
behind intake manifold on 4cyl
The idle speed is read by the Engine Control Module(computer) and adjusted as necessary by use of the idle air control in conjunction with the throttle position sensor. There is no separate idle sensor as such.
The Idle Air control valve is located on the side of the throttle plate.
The idle air temperature (IAT) sensor on a 2007 Ford Edge equipped with the 3.5L V6 is located on the left-front (driver) side of the vehicle. It will be attached to the air intake hose directly upstream to the air filter box.
Is this a 3.1 liter engine? tipicaly by the throttle body area. idle sensor or idle air controll valve?