To install a forward-facing car seat on an airplane, first make sure the seat is FAA-approved. Secure the seat using the airplane seat belt, ensuring it is tightly fastened. Follow the manufacturer's instructions for proper installation and adjust the seat's harness to fit your child securely.
You don't install a newborn car seat. The only thing that you need to do with a newborn car seat is put the car seat in the back of the car and put the seat belts on and lock the seat belts.
The car seat should have directions on the basic install on the seat and in the directions. Local fire departments inspect car seats and will help get it in correctly.
Before you install the car seat, you must find the right car seat for your child and also decide where to install the seat in the car. I would recommend installing it in the middle seat because it is the safest place for a baby to be seated. Reading the instructions will also help and watching youtube videos. Firstly, to install a foward facing seat place the car seat in the car and put the seatbelt through the hole in the car seat and place all your weight on the seat and pull the whole seat belt out and let go until the seat belt lock is on and then sit on the seat and pull the seat belt until it is tight. Then you will need to hook the top harness onto the hook at the back of the car and tighten it. Your seat shouldn't move more than an inch side to side.
If the car is only a 2 seater you can put a FORWARD facing car seat on the passenger side, but I'm not sure about a rear facing car seat.
It's not a rear facing car seat... only forward facing
To properly install a rear-facing car seat using a seatbelt, first, place the car seat in the back seat of the vehicle. Thread the seatbelt through the designated path on the car seat and buckle it securely. Pull the seatbelt tight to remove any slack. Check that the car seat is securely installed by giving it a firm shake. Finally, make sure the car seat is at the correct angle and that the child is properly secured in the seat.
Carefully.
You can get aftermarket car seat heaters installed at most local mechanics. You can also install your own car seat heaters if you follow instructions provided by websites such as heat Your Seat and Heated Seat Kits.
Infant snugride car seat http://www.youtube.com/watch?v=ROpOJBsS1og BEST ONE!! Check it out http://blog.gracobaby.com/2009/07/10/graco-car-seat-installation-videos/
To install a Peg Perego car seat, first ensure that the vehicle's seat is clean and free of debris. Place the car seat in the back seat, ensuring it is positioned at the correct angle as indicated in the car seat manual. Use either the vehicle's seat belt or the LATCH system to secure the car seat tightly, making sure it does not move more than an inch side to side or front to back. Finally, check that the harness is adjusted properly for your child and that the car seat is securely attached before each use.
dont use it unless your child is young and irresponsible
I can't provide your answer, but I know who can. Stop by your local police department...they will be glad to help you correctly install your car seat, and protect that "cargo" of yours!