Window shades are opened during takeoff to allow passengers and crew to see outside in case of an emergency, such as a fire or evacuation. This helps them assess the situation and take appropriate action.
Window shades need to be open for takeoff to allow passengers and crew to see outside in case of an emergency, such as a fire or evacuation. It also helps the crew assess the situation outside the aircraft.
Because you want full 360 degree vision available.
The theory is that if you open up the shades, your eyes will be adjusted to the outside light in case of an emergency evacuation
to make it possible view in case of emergency ,
If you are unable to get the back glass of a 2002 Trailblazer open, you can remove the glass or take the window panel off of the hinges.
NEED TO TAKE THE WHOLE DOOR PANEL OFF
the rail, on the outside of the car at the bottom edge of the window can be pryed off (little clips hold it down) gently pry it off, also then, take skinny screwdriver and poke the pin threw the handle that lets it sway open, and whala, be carefull, HOLD the window in your HAND then open it from the outside of the car, and it comes off when ya open it wider than normal, wha la, its off and hopefully not on the ground in pieces lol good luck
Open the door-stand between the door and the van-look at the armrest there are two Philips screws underneath-unscrew those. The door handle where you open the door! Open and hold it open-there is a 7/16 bolt-unscrew that. The window crank! There is a little cover take a real thin knife and pop that off-there's a Philips screw in the middle of the window crank- unscrew that and remove the window crank. Take a flat blade putty knife between the metal door and the interior door panel-Pop them off and the door panel will come off. Pull the plastic cover off-put the window crank back on and you should see from the there what needs to be done. If you need to take the other door apart and see how it works-it's really pretty simple. Richard p
How do you take the door panel of a sl Saturn 98 window off track.
TAKE THE DOOR PANEL OFF FIRST
hi, is the window motor off track or is the window off track. if the window is leaning or has fell down , take the door panel off and on the window tracks you will two 10mm screws and the track on the window will have two slots for them to slide in. slide them in and tighten them down.
Take door panel off. and put window back on track.