0
What else can I help you with?
Nathan's lawnmower uses 2 3 of a tank of gas to cut three one-act lawns How many one-armed lawns can he cut with a full tank of gas Explain?
To determine how many one-act lawns Nathan can cut with a full tank of gas, we first find the gas used per lawn. Nathan uses ( \frac{2}{3} ) of a tank for three lawns, so the gas used per lawn is ( \frac{2}{3} \div 3 = \frac{2}{9} ) of a tank. With a full tank, he can cut ( 1 \div \frac{2}{9} = \frac{9}{2} = 4.5 ) one-act lawns. Therefore, Nathan can cut 4 one-act lawns completely with a full tank of gas.
How much gas will a Triton tr 21 hold?
The Triton TR 21 typically has a fuel capacity of around 50 gallons. This allows for extended time on the water without frequent refueling, making it suitable for longer fishing trips and recreational outings. However, it's always best to check the manufacturer's specifications for the exact model being referenced, as capacities may vary slightly.
How do you calculate liquid to gas expansion ratio of nitrogen?
The liquid to gas expansion ratio of nitrogen can be calculated using the ideal gas law equation: PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature. By knowing the initial volume of the liquid nitrogen and the final volume of the gaseous nitrogen produced upon vaporization, you can calculate the expansion ratio.
How do you calculate gas condensate ratio?
CGR, or Condensate Gas ratio, is the ratio of condensate liquid volume divided by dry gas volume. The field unit is bbl/MMscf. The inverse of CGR is GOR (Gas Oil ratio), although solution GOR is the amount of gas dissolved in 1 bbl of oil, while CGR is an indicator of how much condensate will drop out of 1 MMscf of gas.
How much oil is added to 20 liters of gas at 50-1 ratio?
To calculate the amount of oil needed for a 50:1 ratio, you can divide the total volume of gas by 50. For 20 liters of gas, you would add 20 liters ÷ 50 = 0.4 liters of oil. Therefore, you should add 0.4 liters of oil to 20 liters of gas at a 50:1 ratio.
What is the fuel mix ratio for a gas gas?
the ratio is 999 degress nort
How do you calculate the compressibility factor for a given gas mixture?
The compressibility factor for a gas mixture can be calculated by dividing the observed pressure of the gas mixture by the ideal gas pressure at the same temperature and volume. This ratio helps to account for the deviation of real gases from ideal gas behavior.
WHAT IS oil gas ratio for ryobi ry08570 blower?
The Gas/Oil ratio is 50:1
What is a reliable test to see if a gas is oxygen?
Set up a fire in the same box as the gas and see if the fire burns well. If it burns well, it is oxygen.
What is split ratio in gas chromato graphy?
The split ratio in gas chromatography refers to the ratio of the carrier gas that is split between the column and the detector. This ratio determines how much of the sample is directed into the column for separation and how much is directed to the detector for analysis. Adjusting the split ratio can affect the sensitivity, resolution, and detection limits of the analysis.
What is the gas ratio?
The gas ratio typically refers to the ratio of gas to air in a combustion process. This ratio is important for maintaining efficient and safe combustion in engines and heating systems. It's usually expressed as a specific ratio based on the type of fuel being used.
What is the purpose of a multi rate well test in gas fields?
A multi rate well test in gas fields is conducted to assess the productivity of the well at various flow rates. This allows operators to determine the optimal production rate that maximizes recovery while maintaining economic viability. The test helps in understanding the reservoir behavior and characteristics, such as permeability and skin factor, which are crucial for efficient gas production.
What is the oil to gas ratio for a gas scooter with a 43cc motor?
my 43 cc scooter has a 1/25 ratio
How fast does a normal 36cc gas scooter go?
It depends on the gear ratio of the drive and driven gears. I would test it out, or call the person you got the scooter from.
