answersLogoWhite

0

A welding torch flame can reach temperatures between 1,500°C to 3,500°C (2,732°F to 6,332°F), depending on the type of fuel and the welding process used. For example, an oxy-acetylene torch can produce a flame that exceeds 3,200°C (5,792°F). The intense heat allows for the melting and joining of metals effectively during welding operations.

User Avatar

AnswerBot

4w ago

What else can I help you with?

Continue Learning about Trigonometry

How hot does a torch burn at?

With the correct mixture of Acetylene and Oxygen the flame can reach 5,000F or more. Other fuels (Propane etc.) do not create temperatures this high.


What is Trailing Angle in welding?

Trailing angle in welding refers to the angle formed between the welding torch or electrode and the workpiece as the welder moves away from the weld joint. It is typically measured from the vertical plane of the joint, with a positive trailing angle indicating the torch or electrode is tilted away from the direction of travel. This angle can influence the heat distribution, penetration, and overall quality of the weld. Proper adjustment of the trailing angle is crucial for achieving optimal weld characteristics and preventing defects.


How do you weld in horizontal position?

Welding in the horizontal position involves holding the workpiece in a horizontal plane and positioning the welding torch or electrode appropriately. To achieve a stable arc, it's important to maintain a slight angle for the torch or electrode, typically around 10-15 degrees, tilted back toward the weld pool. Ensure proper control of the heat input to avoid excessive penetration or distortion. Using consistent speed and technique will help produce a strong, clean weld.


What is the antonym for torch?

mrs.saenz here the antonym of torch is darkness


Where to get the torch from time tangled island?

To get the torch from time tangled island you must go to the viking and blast open the cave and you will receive a torch you must make to the vase before the torch goes out.

Related Questions

Why welders use welding torch not the flame of firewood in welding?

Welding involves melting metal. Wood flames don't get hot enough.


What is the function of the needle valves on a welding torch?

To adjust gas flow therefore adjusting flame intensity.


Explain oxy- acetylene welding process?

Oxygen and acetylene tanks feed into your torch. When opened, the gases will mix in a chamber in the torch, then flow out of the torch tip. Using a spark lighter, they will ignite causing a flame. This flame can be adjusted to a neutral flame by moving the knobs on the tank regulators.


What do you mean oxyacetylene flame?

An oxyacetylene flame is a type of hot, precise flame created by combining oxygen and acetylene gases in a welding torch. This flame is commonly used in metal cutting, welding, and brazing applications due to its high temperature and ability to produce a concentrated heat source.


Why welders use welding torch instead of flame of firewood?

An oxy-acetylene welding torch is used for welding rather than a flame from firewood because it is possible to concentrate the energy and heat at one small precise location, to move it readily, to generate a lot of heat in one small area, to control the amount of heat precisely, and to control the amount of oxygen in the flame and therefore the oxidation occurring at the weld.


What are facts about welding?

# If you look into the flame you'll go blind, # if you touch the flame it will burn you, # your face is always hotter than your buttocks, # a cigarette always tastes better when lit by a torch flame, # always weld with a full gas tank, # you can get a tan/sunburn from welding, and # welding is fun when you weld random items together.


Who invented the welding torch?

John T. Herrera: The Welding Torch Inventor


Which gas burns the hottest when cutting torch is used?

oxygen supports the combustion of the gas that one uses in the welding/cutting torch. Acetylene combined with Oxygen produces the hottest flame.


What tool mixes gas and air to produce a hot flame?

oxy-acetylene torch


Acetylene Torch?

form_title= Acetylene Torch form_header= Do all of your own welding with a new Acetylene Torch. Have you ever used a Acetylene Torch?*= () Yes () No How many do you want to buy?*= {1, 2, 3, 4, 5, More than 5} Are your welding needs for commercial or personal use?*= () Personal () Commercial


Can you use LPG for ARC welding?

ARC welding uses large amounts of electricity to melt the metal, not a hot flame. So no, LPG cannot be used for ARC welding.


What is acetylene welding?

Acetylene welding is a process that involves using acetylene gas as a fuel combined with oxygen to produce a high-temperature flame for joining metals together. The flame generated by burning acetylene with oxygen can reach temperatures up to 3,100 degrees Celsius, making it effective for welding tasks.