The weight a 2x2 wall can support depends on various factors, including the wall's orientation (vertical or horizontal), the material of the wall, the type of roof, and local building codes. Generally, a 2x2 wall is not designed to bear significant loads, especially over a length of 23 feet. For structural integrity and safety, it's essential to consult a structural engineer or building professional to assess the specific situation and ensure compliance with local standards.
100 feet long 4 1/2 pitch
Usually the best way is to simply build a new sloped roof onto the flat roof.
A roof that is 10 x 20 has an area of 200 square feet. The cost to have this size roof shingled is approximately 1,800.00.
1" per 4' minimum.
26 square feet? That is not a roof that is a patch. 5' X5' is 25 square feet, so a minimun job call for a roofer, about $100
Roof trusses are used to support the roof and to make certain that the weight of the roof is distributed equally across the building for maximum support.
Roof support beams are essential in a building's structure to provide stability and strength to the roof, ensuring it can bear the weight of the roof materials, snow, and other loads. They help distribute the weight evenly and prevent the roof from collapsing.
A roof support beam in a building's structure is designed to provide structural support and stability to the roof, helping to distribute the weight of the roof and any additional loads evenly to prevent collapse or damage to the building.
The liner panel for a Butler roof system will support the weight of several weighing up to 300 pounds and their equipment during the erecting of a roof system. Safety standards require that the structure be able to hold at least one ton of weight.
A common synonym for "roof support" or "wooden beam" that is six letters long is "rafter."
The purpose of a ridgeboard in roof construction is to provide support and stability to the rafters at the peak of the roof, helping to distribute the weight of the roof evenly and prevent sagging or collapsing.
A roof joist is a horizontal beam that supports the ceiling below, while a roof rafter is a sloped beam that supports the roof itself. Joists help distribute the weight of the roof and ceiling, while rafters provide the framework for the roof's shape and support the weight of the roof materials.
Roof joists are horizontal beams that support the ceiling and the weight of the roof, while rafters are sloped beams that support the roof itself. Joists are typically found inside the building, while rafters are located on the exterior.
The purpose of a ridge board in a roof structure is to provide support and stability to the rafters at the peak of the roof. It helps to distribute the weight of the roof evenly and prevent sagging or shifting of the roof structure.
255
Without knowing how the roof was constructed and with what dimension of lumber or steel, there is no way to estimate.
Ceiling rafters in a building's structure provide support and stability to the roof, helping to distribute the weight of the roof evenly and prevent it from collapsing.