answersLogoWhite

0

What else can I help you with?

Related Questions

How much candle power in 360 lumen?

Lumen and candlepower are not the same thing. Lumen measure the of light surrounds, like you would light a room with a lamp. Candlepower measures the light in a beam, like a flashlight beam. With a few assumptions you can convert lumen to candlepower. With these assumptions 360 lumen would be 28.6 candlepower.


Why is a light bulb oval?

Some light bulbs are oval shaped so that the light will spread out 360 degrees and go to most places, except under the bottom of the light bulb where it attaches to the lamp.


A light bulb transfers 360 J in one minute from the source of electricity to the filament What is its power?

there are 60 seconds in a minute therefore you divide 360 by 60 and get 6w. 360/60=6 6w is the answer.


How much energy will a 100w light bulb convert to light and heat if it is left burning for 1hour?

Power = Energy/time 100W=Energy/360 Seconds Energy = 100/360 Energy ≈ 0.27 Joules


How many 60 Watt light bulbs can be lit with a 300 watt generator?

3 bulb can be connected..............................


Is a 360 watt 86 volt halogen light ac or DC?

A halogen bulb works equally well with AC or DC.


How many lumens for an led replacement vs stock 1141 bulb?

A lumen is a measure of how much total light a bulb produces. Incandescent (1156) bulbs spray their light through almost 360 degrees and lamp housings designed for them rely on that. Most LED lamps put all their light out in a narrow cone and work poorly with standard 1156 housings. However, there are LED assemblies that have their light-producing chips arranged around a sphere and they work well in standard housings. The LEDs you see on commercial vehicles are mounted in housings designed for their narrow cone output, that's why they look bright. A standard 1156 bulb puts out about 400 lumens when new. As of January 2010, I haven't found an LED replacement that puts out any more, and most are only 50 lumens or so, not enough for a standard 1156 housing. To confirm the above: From Bosch Automotive Handbook7th ed. a 1156 (BA15S) Stop/Turn 21W bulb puts out 460 lumens. For a 5W Side marker / Tail BA15S it is 50 lumens (strangely low, I know) and 10W Tail light 125 lumens. If replacing with a warm white LED, then that is how many lumens you need to match the brightness (as well as light direction being good). BUT, if using a Red LED for a brake light or an Amber LED for Turn signals, then less lumens are needed. This is because the Red lens of a brake light filters out all the blue, yellow, green, etc out of white light, but filters nothing from a Red LED. The question now is: What is the percentage of "Red" in the light output of a "White" incandescent bulb?


How much does bright light therpay usually cost?

This technology is young, and several manufacturers are coming out with new models each year. Prices have ranged from approximately $360 to $500. Design breakthroughs, however, may reduce this price in the future.


When did Eternal Light - video game - happen?

Eternal Light - video game - happened in 360.


How many lumens to equal a watt?

Incandescent bulbs: 10 lumens per watt Halogens: 13 lumens per watt CFLs: 50 lumens per watt A useful bulb to light a small room is 600 lumens, so that would need a 60-watt incandescent, or a 45-watt halogen, or a 12-watt CFL energy-saving bulb. The best CFL bulbs are the spiral ones.


What if there is no ring of light on your xbox 360?

means no controllers are connected


When will Halo Wars come out on the xbox 360?

How do you get to the 3rd Rhino position in halo wars dome of light on Xbox 360